4. ATX4 Functions
4.1 Display when Power Switch Turned On
LCD-Screen
When you power on the transmitter RC6GS, LCD screen shows Model Name, Transmitter Name, Battery
Voltage, Steering Trim, Throttle Trim.
Model Name:
The system can store the data for 10 models, model name will show on the LCD when you power on the
transmitter. Please make sure the model name is the right one that you want. If the model name you chose
is not corresponding with your model, the settings should be wrong.
Battery Voltage:
In addition to the model, LCD can show the voltage of battery. When the voltage is lower than 4.6V, it would
start the low-voltage alarm, it would send out “DDD…” sounds, till the transmitter is power-off. When you
hear the low-voltage alert, you have no more than 4 minutes for controlling your model, please safely stop
your model before the uncontrolled situation. Please make sure the battery voltage is higher than this
voltage data while radio controlling.
Transmitter functions menu setting
When you want to browse or change a setting of transmitter, you should go into function menu setting
mode. Under function menu setting mode, you can set up Language. Select "LANGUAGE", Model Select
"MODEL", End Point Adjuster "EPA", Steering EXP "STEXP", Steering Speed "STSPD", Throttle EXP "THEXP",
Throttle Speed "THSPD", A.B.S. Function "A.B.S", Throttle Acceleration "ACCEL", Idle-Up "IDLUP", Sub-trim
"SUBTR", Servo Reverse "REV", Steering Dual Rate/Second. Dual Rate "D/R", ATL Function "ATL",
Programmable Mixes "PMIX", Auxiliary, Channel 3,4, 5 and 6 "AUX"，Model name "NAME", Reset function
"RESET".
