(5) Cycle duty ratio setup
Select setting item "DTY" by pressing “(-)” or “(+)” button, then press “Enter” key and the initial value of
“DTY” will blink. Use “(-)” or “(+)” button to adjust the duty ratio. (Note: In the interface of adjusting the
value, return to the initial value "0" by pressing “(-)” and “(+)” buttons simultaneously for about 1 second.)
Press “Enter” button, the adjusted value stops blinking, now the value has been set.
"-3": Brake application time becomes shortest. (Brakes lock with difficulty)
"+3": Brake application time becomes longest (Brakes lock easily)
(Remark) For low grip set at the - side and for high grip set at the + side.
Duty ratio (DTY)
-3 ~ 0 +3
Initial value: 0
(6) Steering mixing setup
Select setting item "STM" by pressing “(-)” or “(+)” button, then press “Enter” key and the initial value of
“STM” will blink. Use “(-)” or “(+)” button to adjust the steering mixing range. (Note: In the interface of
adjusting the value, return to the initial value "OFF" by pressing “(-)” and “(+)” buttons simultaneously for
about 1 second.)
Press “Enter” button, the adjusted value stops blinking, now the value has been set.
-Sets the range within which the A.B.S. function is performed relative to steering wheel operation.
Steering operation
When steering mixing is set and steering operation enters the set range, "*" is displayed in front of the
number. When mixing is OFF, the A.B.S function can operate over the entire steering range. When ending
setting, return to the initial screen by pressing “Exit” button twice.
