4.10 Throttle Acceleration "ACCEL“
Function which adjusts the movement characteristic from the throttle neutral position
The servo will jump to the input position at its maximum possible speed. Unlike exponential, which adjusts
the whole throttle movement into a curve, throttle acceleration simply "jumps" away from neutral and then
leaves the remaining response linear.
Setup item
FWRD: Forward side acceleration amount
BRAK: Brake side acceleration amount
Throttle acceleration adjustment
Enter the function menu and use “(-)” or “(+)” button to access ACCEL
function, then press “Enter” button to get into ACCEL function
interface.
(1) Forward acceleration amount adjustment Press “(-)” or “(+)”
button to select “FWRD”, press “Enter” key to confirmand the initial
value of “FWRD” will blink, then use “(-)” or “(+)” button adjust the acceleration amount. (Note: In the
interface of adjusting the value, return to the initial value "0%" by pressing “(-)” and “(+)” buttons
simultaneously for about 1 second.)
Press “Enter” button, the adjusted value stops blinking, now the value has been set.
Forward acceleration amount (FWRD)
0% ~ 100%
Initial value: 0%
(2) Brake side acceleration amount adjustment
Press “(-)” or “(+)” button to select “BRAK”, press “Enter” key to confirm and the initial value of “BRAK” will
blink, then use “(-)” or “(+)” button adjust the acceleration amount.
(Note: In the interface of adjusting the value, return to the initial value"0%" by pressing “(-)” and “(+)” buttons
simultaneously for about 1 second.)
Press “Enter” button, the adjusted value stops blinking, now the value has been set.
"0%": No acceleration
"100%": Maximum acceleration
(Brake side maximum steering angle) Brake side acceleration amount (BRAK)
Brake side acceleration amount (BRAK)
0% ~ 100%
Initial value: 0%
When ending setting, return to the initial screen by pressing “Exit” button twice.
