4.11 Idle-Up "IDLUP“
Idle up at engine start
Use this function to improve the starting characteristics of the engine
by raising the idling speed when starting the engine of a gas powered
car.
Idle-Up rate (RATE)
-50% ~ -1%, 0%, +1% ~ +50%
Initial value: 0%
"-": Brake side
"+": Forward side
Idle-Up "IDLUP"
(1) Enter the function menu and use “(-)” or “(+)” button to access IDLUP function.
(2) Press “Enter” button to get into IDLUP function interface.
(3) Press “Enter” key, and the initial value of RATE will blink. Use “(-)” or “(+)” button to adjust the value.
(Note: In the interface of adjusting the value return to the initial value "0%" by pressing “(-)”and “(+)” buttons
simultaneously for about 1 second.)
Press “Enter” button, the adjusted value stops blinking, now the value has been set.
(4) When ending setting, return to the initial screen by pressing “Exit” button twice.
4.12 Sub-Trim „SUBTR“
Servo center position adjustment
Use this function to adjust the neutral position of the steering, throttle
and channel 3 servos.
Channel
ST: Steering (CH1)
TH: Gas (CH2)
CH3: Channel 3 (VR)
CH4: Channel 4 (SWA)
Sub-trim
ST: -100 ~ 0 ~ +100
TH: -100 ~ 0 ~ +100
CH3: -100 ~ 0 ~ +100
CH4: -100 ~ 0 ~ +100
Initial value: 0
