160350

Arcam solo movie 2 1 Seite 18

18
Zoom out
Zoom in
Vorherige Seite
1/30
Nächste Seite
E-18
Operational set-up
Preferred language
This settings allows you to specify your preferred
language. The default language is English, but three other
languages (French, German and Dutch) are supported.
Status messages
This setting controls the ‘pop up’ messages that appear
on screen.
On Pop-up messages are enabled.
Off No pop-up messages, only menus when required.
Certain messages, such as ‘No Disc’ are always shown
regardless of how this is set.
Subtitle display
This setting controls which subtitles displayed on your TV
(although note that some discs may force the subtitles to
be displayed regardless of how this item is set).
Off No Subtitles.
On Subtitles are displayed in the ‘preferred language’.
Closed
Caption
Closed-caption information from the disc (where
available) is sent to your TV.
The default setting for Subtitle is ‘Off ’.
Note that not all discs will have your preferred language
available as a subtitle. Some discs will require you to
chose your preferred subtitle language from the disc
menu and some discs may force the subtitles to be
displayed regardless of how this item is set. Closed-
caption information is available only on discs produced
for the US and Canadian markets and will be displayed
only by TVs that support NTSC-format signals.
DVD audio priority
Many DVD-Audio discs are actually dual DVD-Audio/
DVD-Video discs. To decide which part is selected for
playing, you can set the priority with this control.
DVD-Audio The DVD-Audio part is played
DVD-Video The DVD-Video part is played
SACD priority
Many SACD discs are actually hybrid SACD/CDs. If multi-
channel audio is provided on the SACD disc you can
determine which of the layers is selected for playing.
SACD MCH layer The SACD multi-channel layer is played
SACD 2-CH layer The SACD two-channel (stereo) layer is
played (default)
CD The CD layer is played
The default setting for SACD priority is ‘SACD 2-CH
layer’.
Disc Auto Resume
Solo Movie 2.1 can remember the last played location for
the last five DVDs played, so that playback can resume
from this ‘bookmarked’ place the next time you insert
the disc.
If the stop button is pressed twice (i.e. a complete stop,
rather than a resume stop), or if Disc Auto Resume is
set to ‘Off’, any bookmark is ignored and playback starts
from the beginning of the disc.
On Playback starts from the last bookmarked position.
Off Playback starts from beginning of disc.
DivX subtitle
If you use DivX subtitles, choose the appropriate
language group from the list. The factory setting is
‘Western European’: Turkish, Central European, Cyrillic
and Greek are the other options.
DivX registration
DivX Video-On-Demand (VOD) is a digital video
delivery service that lets you copy video content from
your computer to a CD or DVD for playback on your
Solo Movie 2.1. To register for this service, a player-
generated registration code is required. This code can be
seen by selecting the ‘DivX registration’ button.
For more information on this service, please visit
https://vod.divx.com.
HDMI colour space
This setting controls the type of video (the colour space)
given out over the HDMI connection.
Auto The colour space will be set appropriately
for the connected display.
This is the recommended setting if you are
connecting Solo Movie 2.1 to an HDMI- or
DVI-compliant device.
RGB The HDMI connection carries RGB video
with standard video levels.
RGB (PC) The HDMI connection carries RGB video
suitable for use with a computer monitor.
YUV The HDMI connection carries Y, Pb, Pr
(YUV) component video.
This setting has no effect on the analogue video outputs.
Video resolution
This allows you to match the video output to your
display device. To avoid a mismatch resulting in loss
of picture, changing the video resolution produces a
confirmation screen. The video output reverts to the
previous setting in 15 seconds unless you confirm the
new setting with ‘Ok’.
Auto The appropriate video resolution is selected
automatically from the display device, where
possible.
SD-interlaced Use this setting if your display device does
not support progressive scan or HDMI.
SD Progressive The component- and HDMI-video outputs
will put progressive scan video out for both
PAL and NTSC discs. Use this setting only
if your display device supports progressive
scan.
720p 1280 x 720 (16:9) HDTV format,
progressive scan
1080i 1920 x 1080 (16:9) HDTV standard format,
interlaced scan
768p 1366 x 768 (16:9) Wide XGA format,
progressive scan
Analogue NTSC black (Pedestal)
This setting controls the ‘pedestal’ signal or black level
when the NTSC video standard is used.
0 IRE This removes the pedestal from NTSC video.
This setting should be used in Japan, and
also if you are using RGB video, whatever
the country.
7.5 IRE This is the standard pedestal level that
should be used in all countries that use
NTSC video, with the exception of Japan.
This setting can be changed only if ‘Main video output’ is
set to ‘Analogue’. Note that this setting has no effect on
PAL, progressive scan or HDMI outputs.
Video set-up
If your display device is HDMI-compliant, Solo Movie 2.1
can read the capabilities of the display device directly; the
information allows Solo Movie 2.1 to configure its output
automatically and optimally for the attached device.
See page 8 for more information about connecting to
HDMI devices.
Display standard
This is set at the factory to be appropriate for the type
of display device used in your country. If your display
supports both PAL and NTSC standards, select ‘Auto’.
The options are as follows.
Auto The video output is taken from that recorded on
the disc. When no disc is playing, the logo screen is
displayed using the standard of the last disc played.
NTSC NTSC is used as the video standard. Note that PAL
discs are converted to NTSC, but this compromises
the quality of the video output (and may cause the
video to become ‘jerky’). This is the best setting to use
if your display device can accept only NTSC video
(this is generally the case in North America); better
results are obtained by using ‘Auto’, but your display
device must be capable of supporting PAL.
PAL PAL is used as the video standard. Note that NTSC
discs are converted to PAL, but this compromises the
quality of the video output (and may cause the video
to become ‘jerky’). Better results are obtained using
‘Auto’, but in this case your display device must be
capable of supporting NTSC.
Display shape
This needs to be set correctly for the type of display
device you have and the type of display you prefer. For
4:3 displays, ‘Letterbox’ is recommended.
4:3 Letterbox Use this setting if you have a 4:3 display device
and you prefer to view wide screen movies in
letterbox format (with black bars at the top
and bottom).
4:3 Panscan Use this setting if you have a conventional 4:3
display device, and you prefer to view wide
screen movies in Pan & Scan format (cropping
the sides of the image).
16:9 Use this setting if you have a wide screen
(16:9) display device.
Material in 16:9 format is displayed so as to fill
the screen.
If you have a 4:3 display device and you have set a
preference for ‘4:3 Panscan’, it does not mean you will
always see movies in this format, since Panscan display
must be supported by the disc being played.
Progressive scan displays
Not all displays support progressive scan. If you enable
progressive scan accidentally and your display does
not support it, you may be unable to view the picture
from Solo Movie 2.1, including the on-screen display
required to change the video settings back.
If this happens, use a composite or SCART video
connection between Solo Movie 2.1 and your display
device in order to be able to see the set-up menu and
correct the mistake.
… 18 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Arcam solo movie 2 1 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Arcam solo movie 2 1

Arcam solo movie 2 1 Bedienungsanleitung - Deutsch - 30 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info