Bedienungsanleitung Atmos A45SPT (Seite 44 von 72) (Englisch)

810414

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

www.atmos.cz

44-EN

Operation and Maintenance Manual - EN

If the function (Parameter S34 = 2) is turned on in the boiler, the following practice is used

for boilers DC40GSP and DC40SPT:

For wood heating, swich the selector switch to the top position (I) – the wood burning symbol.

To start heating with pellets, swich the selector switch the bottom position (II) – the pellet

burner symbol. Model DC40GSP and DC40SPT with the automatic start function activated (default

settings) allows swich the selector switch at any time, regardless of fuel being fired.

Setting the selector switch into the position for pellets with initiate the burner DIAGNOSTICS to

determine the existing boiler status (waste gas temperature, boiler temperature, temperature inside

the buffer tank).

In case the preconditions for immediate burner launch are not met, that means the boiler is at the

wood firing or burnout stage, when the magazine still contains sufficient quantity of wood, the

burner will be set into standby. The exhaust fan on the boiler will remain in operation (provided

the parameter S6 = 11, 4 has been set) to ensure proper burnout of wood.

The burner display will show the AUTOSTART message at this stage.

If the AUTOSTART message keeps flashing slowly, the precondition defined for particular

function (S34 = 1 or S34 = 2) has not been met – the wood burnout is still in progress.

If the AUTOSTART is flashing fast (wood burnout is completed), the precondition defined by

the particular function has not been met (S15 = 2), which means that the temperature TV on the

accumulation (buffer) tank has not dropped below the set value given by the parameter S16 (the

energy from the accumulation tank has not been exhausted). This condition may also occur, if the

control thermostat on boiler has not been activated or if the end limit switch on the top stoking

doors has not been pushed (no star symbol lit up at the thermostat symbol in the burner display).

Once all the preconditions for burner launch have been met (wood burnt out, accumulation tank

exhausted), it will be commissioned. The exhaust fan will not be in use during regular pellet

firing process (parameter S6 = 11).

Never forget to push limit switch with a push-button!

INFO – In case of an electric outage, the burner will perform a DIAGNOSTIC and, if all

conditions are met, will burn out and return to normal operation. Otherwise it will await the

fulfillment of previous conditions (drop of exhaust and water temperature).

If we want to use wood to heat up the boiler, it suffices to place the switch on the wood

position (I). However, it is better to first keep the switch on the „0“ position for 10 - 15

minutes so that the burner can properly burn out. This is an ideal time to prepare the fuel

for stoking.

WARNING – DC40GSP and DC40SPT boilers do not allow you to control the solar heating

function directly from the pellet burner. Additionally the TK and TSV sensors are used for

measuring the temperature of the boiler and exhausts during this function.

• Parameter S35 – characterizes the limit (max.) temperature of the boiler TK, during which the

burner will automatically start during the AUTOSTART function (S34 = 2)… (75 °C)

• Parameter S36 – characterizes the limit (max.) temperature of the exhausts TSV, during which the

burner will automatically start during the AUTOSTART function (S34 = 2)… (80 °C)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atmos A45SPT Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info