Bedienungsanleitung Atomos NinjaV (Seite 27 von 67) (Englisch)

769373

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

Atomos Ninja V – User Manual Edition 1: Aug 2021 25

SDI Output: In the VIDEO OUT section of the Output

menu page, the SDI module will automatically detect

the resolution and frame rate of the SDI input when

connected. The Ninja V detects the active input

ChannelSourceandcongurestheotherconnectoras

an Output.

SDI 3G Type: Allows you to specify the ‘SDI 3G Type’

forcompatibilitywithequipmentthatexpectsaspecic

type of 3G-SDI video. Tap to cycle through the options:

Level A, Level B or Auto.

You can only output SDI when the INPUT is in ‘SINGLE’

or ‘AUTO SELECT’ mode.

SDI Compatibility Mode

Some video devices use a slightly different version of

the 12G standard, which can cause issues with their

ability to detect a video signal that is output from an

Atomos device. Enabling SDI Compatibility Mode will

cause your Ninja V to send out a video signal in the

format that these devices expect. Tap the switch to

toggle between On and Off.

7. Using the Ninja V

AtomX SDI Expansion Module Record

Space Remaining

Indicates the expected recording time remaining on the

inserted HDD/SSD media at the current settings.

Changing your recording settings may extend or

decrease your available recording times.

Pre-Roll

With this option turned on you will see a red Pre-Roll icon

ashinthetoplefthandcornerandawhitecircular

arrow around the record button. Whilst enabled, the input

has constantly been recorded with approximately the last

8 seconds in HD and 2-3 seconds in 4K being cached

into memory. The frame rate and codec selected will

determine the number of seconds being cached for

Pre-Roll. Using a lower bit rate codec setting and shooting

at a lower frame rate will increase the length of Pre-Roll.

When the record button is pressed or trigger is sent, the

buffered Pre-Roll data in memory will be written out to

the start of the recording. This means if you are a few

seconds slow hitting the record button when something

interesting happens you will still capture the shot.

With Pre-Roll mode activated the Recorder is

constantly caching frames internally to the unit and

as such any feature that can not be changed whilst

recording is disabled. This includes audio channel

select, 3D LUT record, codec, disk options etc.

CODEC (Recording Format)

Codec Format

To select a codec tap on the currently displayed codec to

toggle between Apple ProRes®, Apple ProRes RAW, Avid

DNxHD® and H.265. After selecting a codec, you will be

promptedtotapConrmtoswitchtothatcodec.

If you select an optional codec like Avid DNx, ProRes

RAW or H.265, you will be prompted to activate the codec

at my.atomos.com as these codecs must be activated

before use.

Output Record

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atomos NinjaV Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Atomos NinjaV

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info