Bedienungsanleitung Atomos NinjaV (Seite 29 von 67) (Englisch)

769373

Zoom out

Zoom in

Vorherige Seite

1/67

Nächste Seite

Atomos Ninja V – User Manual Edition 1: Aug 2021 27

Pulldown is only applicable to interlaced HD signals, not 4K

Camera Setting Pulldown Ninja V Receives

1080p23.98 3:2 1080i59.94

1080p24 3:2 1080i60

1080p25 2:2 1080i50

1080p29.97 2:2 1080i59.94

1080p30 2:2 1080i60

You will of course want the Ninja V to record the actual frame rate such as

1080p23.98, not the1080i59.94 to disk. In many cases, it is not possible

for the Ninja V to detect when pulldown has been applied to the video, so

you will have to set the correct mode of removal on the Ninja V to match

the setup of your camera.

With some cameras, the Ninja V can detect and remove the pulldown

automatically, in which case the mode you expect (e.g. 1080p23.98) will

display on the Ninja V and you will not have to do anything further.

If there is no input detected, then toggle the input by pressing the screen

until you see the input you wish to record.

Atomos is adding auto-detection support for more cameras, please

check for rmware updates regularly at www.atomos.com

1080p23.98 or 1080p24

If you have set 1080p23.98 or 1080p24 in your camera and your Ninja V

displays 1080i59.94 or 1080i60, then you can easily remove the pulldown

by following these steps:

• Select the Input Menu from the top Left and toggle the blue arrow

underneath Record repeatedly until you see 1080p23.98 (or 1080p24)

displayed. You may not get a green tick in this column immediately.

• Your Ninja V needs to analyze the video for about 1 second, in order

to detect the pulldown sequence and remove it.

• If it is not automatically detected after 1 second, wave your hand

from side to side in front of the lens, or wave the camera from side to

side for a few seconds. The Ninja V will detect the pulldown cadence

in the movement, and you will see a green tick along with the video

displayed on the screen.

3:2 pulldown detection is difcult, it is not impossible to detect on

completely still video. This is why you should wave your hand in front

of the lens.

If you lose the input detection – for example you unplug the HDMI

cable or go to Playback mode, you will need to wave your hand or the

camera again, when the signal is restored to the Ninja V.

Some cameras use a variant of pulldown removal, for example

Panasonic Advanced pulldown. The Ninja V does NOT support this

format, and it will not be detected.

Standard Panasonic pulldown is supported, ensure in the Panasonic

camera settings that pulldown is not set to Advanced.

1080p25, 1080p29.97 or 1080p30

For these modes, access the Record Menu tab and simply press the

Record Format options repeatedly until your 1080p desired format is

displayed. There is no need to wave your hand or the camera, as 2:2

pulldown removal does not require moving video.

7. Using the Ninja V

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Atomos NinjaV Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Atomos NinjaV

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info