Bedienungsanleitung Bauknecht EMEK7CP545 (Seite 10 von 10) (Englisch)

703821

Zoom out

Zoom in

Vorherige Seite

1/10

Nächste Seite

CLEANING AND MAINTENANCE

Make sure that the oven has cooled down before

carrying out any maintenance or cleaning.

Do not use steam cleaners.

Wear protective gloves.

Do not use wire wool, abrasive scourers or abrasive/

corrosive cleaning agents, as these could damage the

surfaces of the appliance.

The oven must be disconnected from the mains

before carrying out any kind of maintenance work.

EXTERIOR SURFACES

• Clean the surfaces with a damp microfibre cloth.

If they are very dirty, add a few drops of pH-neutral

detergent. Finish off with a dry cloth.

• Do not use corrosive or abrasive detergents. If any

of these products inadvertently comes into

contact with the surfaces of the appliance, clean

immediately with a damp microfibre cloth.

INTERIOR SURFACES

• After every use, leave the oven to cool and then

clean it, preferably while it is still warm, to remove

any deposits or stains caused by food residues To

dry any condensation that has formed as a result

of cooking foods with a high water content, let the

oven to cool completely and then wipe it with a

cloth or sponge.

• Activate the “Diamond Clean” function for

optimum cleaning of the internal surfaces.

• Clean the glass in the door with a suitable liquid

detergent.

ACCESSORIES

Soak the accessories in a washing-up liquid solution

after use, handling them with oven gloves if they are

still hot. Food residues can be removed using a

washing-up brush or a sponge.

The glass tray is dishproof safe.

TROUBLESHOOTING

Problem Possible cause Solution

The oven is not working.

Power cut.

Disconnection from the mains.

Check for the presence of mains electrical power and

whether the oven is connected to the electricity supply.

Turn off the oven and restart it to see if the fault persists.

The display shows the letter “F” followed

by a number.

Software fault.

Turn off the oven and restart it to see if the problem

persists. Try to perform the “FACTORY RESET” from,

selectable from “SETTINGS”. Contact you nearest Client

After-sales Service Centre and state the number following

the letter “F”.

The oven does not heat up.

When “DEMO” is “On” all

commands are active and menus

available but the oven doesn’t

heat up.

Access “DEMO” from “SETTINGS” and select “Off”.

PRODUCT FICHE

WWW

The product fiche with energy data of this

appliance can be downloaded from Bauknecht

website docs . bauknecht . eu

HOW TO OBTAIN THE USE AND CARE GUIDE

WWW

Download the Use and Care Guide

from our website docs . bauknecht . eu (you

can use this QR Code), specifying the

product’s commercial code.

> Alternatively, contact our Client After-sales Service.

CONTACTING OUR AFTER-SALES SERVICE

You can find our contact details

in the warranty manual. When

contacting our Client After-sales

Service, please state the codes

provided on your product’s

identification plate.

XXX/XXX

XXXXXXXXXXXX

400011280531

Printed in Italy

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bauknecht EMEK7CP545 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bauknecht EMEK7CP545

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info