Bedienungsanleitung Behringer Ultralink UL2000M (Seite 13 von 24) (Englisch)

656672

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

ULTRALINK UL2000M

1. Turn the selection switch to one of the positions 1 - 8, corresponding to the desired channel number. If

a valid value is selected (i.e. neither 9 nor 0), the LED blinks quickly once as a confirmation.

2. Briefly press the POWER button. The LED blinks with medium tempo. The number of individual flashes

within one cycle corresponds to the value/channel number selected on the selection switch.

 If an invalid channel number is selected (0 or 9), the channel selected last remains selected.

Changing the channel when the transmitter is powered off

1. Turn the selection switch to one of the values (1 - 8), corresponding to the desired channel number.

2. If you turn on the transmitter, the channel you selected is automatically loaded.

 If an invalid channel number was selected (0 or 9), the channel selected last remains selected.

3.2.3 Setting your own frequency

A carrier frequency in the range between 798.1 and 805.9 MHz can be freely selected. This frequency is

stored in a self-assignable user preset (Preset 1).

 The carrier frequency can only be set in 25-kHz steps. The frequency you select has to be a

multiple of 25 kHz. If you select a frequency that is not a multiple of 25 kHz or does not lie in

the frequency range between 798.1 and 805.9 MHz, the ULM2000 gives off an error message

(the LED blinks quickly 5 times).

1. Engage MUTE. The transmitter can now be switched to the programming mode.

2. Turn the selection switch to 9 and confirm your selection by keeping the POWER button pressed for

about 2 seconds. The LED indicates confirmation by blinking once with medium tempo and blinking

once slowly. The transmitter is now in the programming mode and awaits the entry of a 6-digit frequency.

3. Enter all 6 digits one after another in the following fashion:

 Select the desired value on the selection switch, for example 4. If a valid value is selected, the

LED blinks quickly once as a confirmation. This way, you can be sure that a correct value is

entered (in regard to the frequency range and divisibility by 25 kHz) even before confirming your

selection.

 Confirm your selection by briefly pressing the POWER button.

 If the end frequency value you entered is valid, the LED blinks quickly once more. If the frequency

value is invalid, the LED blinks quickly 5 times, and the unit is no longer in the programming

mode. In this case, start anew with step 2.

After a brief interruption, a second blink code is given: the LED blinks corresponding to the value

selected (in this case, 4 times) with medium tempo.

 The value 0 is indicated by a very short blink of the LED, and you will easily tell a

0 from a 1.

 If no entry is made for more than 5 seconds (either on the selection switch or by pressing the

POWER button), the LED blinks quickly 5 times, and the programming mode is aborted.

After entering the 6 digits for the frequency value, enter another value to indicate the channel number under

which the frequency will be stored.

4. Select a desired channel number on the selection switch, for example channel 2 (possible values: 1 - 8).

If a valid value is selected, the LED blinks quickly once to confirm. This way, you can be sure that a

correct channel number is being entered even before confirming your selection.

5. Confirm your selection by briefly pressing the POWER button.

6. When a valid value is selected, the LED blinks briefly again. When an invalid value is selected, the

LED blinks quickly 5 times and the unit is no longer in the programming mode. In this case, start anew

with step 2.

After a brief interruption, a second blink code is given: the LED blinks corresponding to the value

selected (in this case, 2 times) with medium tempo.

3. ULM2000 MICROPHONE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer Ultralink UL2000M Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer Ultralink UL2000M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info