Bedienungsanleitung Behringer Ultralink UL2000M (Seite 14 von 24) (Englisch)

656672

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

ULTRALINK UL2000M

7. After a second blink pause, an additional blink code is given as a confirmation:

 A successfully stored frequency is signaled with 2 slow blinks. The transmitter leaves the

programming mode.

 If the LED blinks quickly 5 times, the frequency was not stored. In this case, start anew with step 2.

 If no entry is made for more than 5 seconds (either on the selection switch or by pressing the

POWER button), the LED blinks quickly 5 times, and the programming mode is aborted.

8. Disengage the MUTE switch.

 A user-assigned frequency is automatically stored in the user preset (Preset 1)!

3.2.4 Preset

The ULM2000 lets you work with 4 presets, each with 8 channels.

Factory presets (Presets 2, 3 and 4)

In the ULM2000, there are 3 factory presets (each with 8 interference-free channels). That means that all 8

channels of one preset can run simultaneously with 8 different transmitters and receivers without causing

interference to one another.

The channels in the 3 factory presets are all assigned to different frequencies. This way, you can always

select a frequency range that assures the best signal transmission.

The following table shows which frequencies are stored in the factory presets.

CHANNEL PRESET 2 PRESET 3 PRESET 4

1 798,700 MHz 798,400 MHz 798,100 MHz

2 799,950 MHz 798,950 MHz 798,650 MHz

3 800,650 MHz 799,800 MHz 799,500 MHz

4 801,050 MHz 801,450 MHz 801,150 MHz

5 802,850 MHz 803,250 MHz 802,950 MHz

6 804,500 MHz 803,650 MHz 803,350 MHz

7 805,350 MHz 804,350 MHz 804,050 MHz

8 805,900 MHz 805,600 MHz 805,300 MHz

Tolerance 0.005%

Table 3.1: Factory preset frequencies (presets 2,3 and 4)

User preset (Preset 1)

Preset 1 is meant for the user. Frequencies of your own choice can be stored in the 8 storage slots of this

preset.

If you have not stored any of your own frequencies, the frequencies stored in the user preset (Preset 1) are

identical to the frequencies stored in Preset 3.

Loading a preset

1. Engage MUTE. The transmitter can now be switched into the programming mode.

2. Turn the selection switch to 0 and confirm your selection by keeping the POWER button pressed for 2

seconds. As a confirmation, the LED blinks slowly once and then once again with medium tempo. The

transmitter is now in the programming mode and waits for you to enter a one-digit number.

3. Select the desired preset number on the selection switch, e.g. 3 (possible choices: 1 - 4). If a valid

selection is made, the LED blinks once quickly to confirm your selection. This way, you can be sure that

a correct value is entered (in regard to the selection of presets, Mic Gain and Auto Mute) even before

confirming your selection.

 Selecting 5 or 6 changes the Mic Gain setting (ch. 3.2.5). Selecting 7 or 8 changes the Auto

Mute settings (ch. 3.2.6). Values 9 and 0 are invalid.

4. Confirm your selection by briefly pressing the POWER button.

5. If the selection you made is valid, the LED blinks quickly once again. An invalid selection is indicated

with 5 quick blinks, and the unit is immediately no longer in the programming mode. In this case, start

anew with step 2.

After a brief break, a second blink code is given: The LED blinks according to the value selected (for

example, in this case 3 times) with medium tempo.

3. ULM2000 MICROPHONE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer Ultralink UL2000M Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer Ultralink UL2000M

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info