Bedienungsanleitung Behringer X32 Rack (Seite 7 von 27) (Deutsch, Englisch, Französisch, Portugiesisch, Spanisch)

660494

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

12 13X32 RACK DIGITAL MIXER Quick Start Guide

X32 RACK DIGITAL MIXER Controls

(EN) Step 2: Controls

(1) (3) (4) (5) (11) (13) (17)(6) (10) (16) (21)

(7) (8) (19) (20)(9) (12) (14) (15) (18)

(22)

(2)

(23) (24) (31)

(26)

(25)

(27) (29)(28) (30)

(10)

(1) USB button opens the Recorder View on

the MAIN DISPLAY, causing the LED to glow

green. The LED will glow red to indicate

access on the DATA/AUDIO input. An unlit

LED indicates no data access and inactive

Recorder View.

(2) DATA/AUDIO USB input allows connection

of USB ashdrives for rmware updates,

loading/saving scenes and show les,

and playing back or recording WAV les.

(3) CHANNEL SELECT control cycles through all

channels by turning the knob. By pressing

this knob, you can jump to the next type

of channels.

(4) CHANNEL TYPE LEDs indicate which type of

channel is currently selected.

(5) CHANNEL NUMBER display shows the

currently selected channel.

(6) INPUT METER displays the pre-fader input

level of the selected channel.

(7) SOLO button routes the currently selected

channel to the monitoring paths. The LED

lights when active.

(8) CHANNEL LEVEL control adjusts the currently

selected channel’s output.

(9) MUTE button mutes the currently selected

channel. The LED lights when active.

(10) MAIN MENU buttons open specic menus on

the MAIN DISPLAY.

(11) MAIN DISPLAY shows permanent

information about the mixer’s conguration

as well as information about the currently

selected menu.

(12) DISPLAY ENCODER knobs allow adjustment

and on/o selection of the menu

items indicated at the bottom of the

MAIN DISPLAY.

(13) MAIN METER indicates the Main Mono or

SOLO level in the left meter and the Main

Stereo level on the right.

(14) PAGE SELECT buttons curse horizontally

in the MAIN DISPLAY and make

Yes / No conrmations.

(15) LAYER SELECT buttons access dierent

parameter layers that can be edited by the

DISPLAY ENCODERS.

(16) TALK button engages the Talkback

microphone. Routing is dened in the

Monitoring Preferences page.

(17) TALK LEVEL knob sets the Talkback mic gain.

(18) CLEAR SOLO button lights to indicate that

one of the channels has been Soloed.

Press to deactivate all active solo functions.

(19) MAIN LR LEVEL knob adjusts the main stereo

output bus.

(20) ON/OFF button turns the power on and o.

(21) MONITOR LEVEL knob adjusts the

headphone and monitor output volume.

Connect headphones to the ¼" front

panel input.

(22) TALKBACK input connects a talkback

microphone via XLR cable.

(23) MONITOR outputs send audio to monitor

speakers via ¼" balanced cables.

(24) AUX IN and OUT jacks send and receive

signals via ¼" and RCA connectors.

(25) XLR OUT jacks send audio via XLR cable.

Output signals are congured on the

Routing/Aux Out page of the MAIN DISPLAY.

(26) X-USB card provides 32 channels of

input and output via USB cable to and

from any connected personal computer

DAWapplication.

(27) ETHERNET connector allows full OSC-based

remote control of the X32 RACK.

(28) MIDI IN/OUT allows the unit to send and

receive MIDI commands via standard 5-pin

DIN cables.

(29) ULTRANET connector sends 16 channels of

audio to a P16 monitoring system.

(30) AES50 A and B connectors allow 96 channels

of bidirectional audio for connection to S16

digital snakes or other X32 family products.

Shielded CAT-5e cable should always be used

for AES50 connections between X32 and

S16 units.

(31) XLR IN jacks receive inputs via XLR cable.

These inputs feature 16 MIDAS-designed

mic/line preamps with 72 dB of gain range.

Each input has an adjacent red LED to

indicate when 48 V phantom power supply

is engaged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Behringer X32 Rack Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Behringer X32 Rack

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info