648619
9
Zoom out
Zoom in
Vorherige Seite
1/18
Nächste Seite
010508A-1 8
(Figure 1)
NOTE: If you do not have a standard
modular wall jack, have a qualified
technician mount one on the wall.
Handset Retainer Tab Installation
If the base unit is to be placed in the
wall mount position, the handset retainer
tab must be pulled out, turned around
and placed in the opposite direction, so
that the tab allows the handset to hang
onto the base unit, as shown in figure 2
(Figure 2)
OPTIONAL AC ADAPTOR
CAUTION: Use only with Class 2
AC Adaptor (not included)with a rating
of 120VAC input, DC6V, 100 mA
output with a center tip that is negative.
The adaptor plug must correctly fit the
machine’s DC jack.
1. Plug the AC Adaptor into a standard
AC outlet.
2. Insert the small plug into the DC
jack on the rear of the base.
NOTE: If you wish to order the optional
AC Adaptor, an Accessory Order Form
has provided with this unit.
CALLER ID OPERATION
Setting the Language Mode
After the battery installation and power
connection, the LCD panel will display
“E F S”
where, E = English
F = French
S = Spanish
1. Press either the Review UP or
DOWN button to select the desired
language.
2. Press the DELETE button to
confirm , then display will change
to show “set area code.”
Setting the Area Code
1. Press review UP or DOWN button
to select the correct digit number.
2. Press DELETE button to confirm
and shift to the next digit.
3. Repeat steps 1-2 to set the next two
digits.
4. After the area code is completed,
press DELETE button again to
change the display to TIME/DATE
setting.
Setting the TIME/DATE
The first digit will be blinking
1. Press repeatedly either the Review
UP or DOWN button to set the
correct time and date.
2. Press the DELETE button to shift
the cursor to the next setting.
3. Once the correct TIME/DATE is
shown on the display, press the
DELETE button to confirm the
setting.
Changing the Language Mode, and
Time/Date
SET TIME/DATE
SET TIME/DATE
Handset
Retainer
Tab
Studs
Modular
Wall
Plate
Wall Mount
slots
Base Unit
(Side View)
9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bell phones Big Button Plus 20270 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info