Bedienungsanleitung Bell phones Big Button Plus 20270 (Seite 11 von 18) (Englisch)

648619

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

010508A-1 10

Automatic Call Back

Allows you to automatically dial the

number of the person who has called

previously, provided that Caller ID

information has been recorded.

1. Select the caller you want to call

back by pressing the Review UP or

Review DOWN button.

2. When the call record is displayed

during review lift the handset or

press the SPEAKERPHONE button.

Press the call back button. The

phone

number displayed on the

LCD will be dialed automatically.

The LCD panel will show the IN

USE icon "

” and the talking

timer starts to count in 5 seconds.

NOTES:

•

The Call Back feature will not dial

the phone number if the selected

Call Record phone number is

blocked or if it is not available.

OPTION Button

Each press of this button will change the

format of display as follow.

7 – digit --- 7digit phone number

10 – digit – 3 digit area code + 7 digit

phone number

11 – digit – long distance code “1” + 3

digit area code + 7 digit

phone number.

Erasing A Single Call Record

Press either the Review UP or

DOWN button to display the call

record to be erased.

Press quickly the DELETE button

twice. The display will show the

next caller ID record, after you have

deleted the call record.

NOTE: A call record cannot be

retrieved once it has been deleted.

Erasing All Call Records

1. Press either the Review UP or

DOWN button once to enter the call

history list and to review all call

records.

2. While the last call record is

displayed. Press and hold the

DELETE button for at least five (5)

seconds until the LCD display

shows “NO CALL”.

LCD Panel Display Messages

Different messages are displayed on the

LCD panel to indicate the status of the

Caller ID.

TOTAL XX NEW XX

•

While the caller ID is in standby

mode, it shows the count for the

total number of calls and new calls

received.

BLOCKED CALL

•

In some areas, caller may be able to

block their name and phone number

from appearing on the Caller ID of

the receiving party. The LCD panel

will display “BLOCKED CALL”

on the last line of the LCD panel.

OUT OF AREA

•

This is a call from an area where

Caller ID service is not yet offered

or an area that is not yet providing

Caller ID delivery via the long

distance network. The LCD panel

will display the “OUT OF AREA”

on the last line of the panel.

NEW CALL INDICATION

•

If you have new calls to be

reviewed, the MESSAGE/New Call

LED Indicator on the unit will blink

and “NEW” will momentarily

appear on the upper right hand

corner of the panel. Once you have

reviewed all new call records and

message waiting messages,

MESSAGE/NEW CALL LED

indicator will turn off and the new

call counter will reset to "00".

$$TOLL ICON

• Appears on the upper left side of the

LCD screen when the incoming call

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bell phones Big Button Plus 20270 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info