Bedienungsanleitung Bell phones Big Button Plus 20270 (Seite 10 von 18) (Englisch)

648619

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

9 010508A-1

1. Press and hold the “DELETE”

button, then press the UP button.

The display will show “E F S".

2. Follow steps described in section

of Setting the Language Mode,

Area Code and TIME/DATE (Initial

Use).

Automatic Time/Date Stamping

Your Caller ID automatically sets the

Time & Date when a call is received

Receiving Caller ID Information

All incoming phone calls are stored in

the order in which they are received.

Make sure that the Call Identifier

Delivery (CID) service is being

provided on your telephone line by your

local phone company. When CID data

is sent, the Big Button Plus 20270 will

automatically capture and display the

information from the phone company.

NOTE: If you answer the telephone

before the second ring, the LCD panel

will not show Caller ID information.

• If the caller’s name and phone

number is available, the LCD panel

will display the information in the

format as shown :

•

If only the caller’s phone number is

available, the caller’s phone

number will be shown and the third

line of the LCD panel will show

“

-----

”.

• If the caller’s name or phone

number is blocked by the sender,

the LCD panel will display

“BLOCKED CALL” on the third

line of the panel.

• If the call is Out of Area, the LCD

panel will display

“

OUT OF

• AREA” on the third line of the

panel.

•

When the Caller ID receives the

message waiting signal from your

local phone company, the

“MESSAGE WAITING” will be

displayed on the LCD panel for a

short time. “MSG” icon will flash

on the top line of the LCD and the

new call LED indicator will be

blinking.

•

If the number received does not

have the same area code stored in

the Big Button Plus 20270, the

phone number will automatically

add “1” along with the area code &

phone number.

NOTE: The Message Waiting feature is

an optional service provided by your

local phone company. For more details

regarding definitions of terms, refer to

the Glossary section.

Clear Message Waiting Indicator

Press and hold the DELETE button,

followed by the review DOWN button

to clear the message waiting.

Reviewing Call Records

If you have received new calls, the New

Call LED indicator will blink and the

LCD panel will display the total number

of calls stored. A new call Counter is

located on the upper right hand corner of

the LCD panel to indicate the number of

new calls received.

Using the Review UP and Review

DOWN buttons

• Press the Review UP or Review

DOWN buttons to browse through

the call records. The most recent

call is displayed first on the LCD

panel.

NOTE: The LCD display will display

“END OF LIST” on the third line of the

LCD display indicating the ending of the

call history list is reached while using

the Review UP or DOWN button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bell phones Big Button Plus 20270 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info