Bedienungsanleitung Berbel BKF 90 iPP (Seite 23 von 36) (Englisch)

784247

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Operation

6006113_a – 01.06.2022

4.6 Connecting the device to the extractor hood

The connection is possible for the following hoods:

yExtractor hoods with „Berbel Connect 2.0“ accessories.

yCeiling lift hoods with remote control.

The following steps must be carried out in parallel on the

hob and on the extractor hood.

☞Perform the following steps for the control panel supplied

with your extractor hood.

Extractor hoods with control panel “V8”

☞Press and hold both buttons at the

same time (> 3 sec.) to start the

connection process.

Both buttons flash for 2 minutes.

Extractor hoods with control panel “V7”

☞Press and hold both buttons at the

same time (> 3 sec.) to start the

connection process.

Both buttons flash for 2 minutes.

Ceiling lift hoods

The additional buttons are located under

the cover on the underside of the hood.

☞Press and hold the two additional

buttons at the same time (> 3 sec.),

to start the connection process.

Perform the following step on the hob if the buttons on the

extractor hood are flashing.

☞Switch on the hob.

☞Touch the symbol (> 5 sec.) to start

the connection process.

The dot above the symbol flashes for

2 minutes.

The devices are successfully connected when the symbols for

operating the extractor hood appear on the hob.

4.7 Operation of the extractor hood

To achieve an optimal efficiency in removing cooking fumes:

☞Turn the extractor hood on 1-2 minutes before you start

cooking. This allows the flow of air to build up, and the

fumes are removed at an early stage.

☞During the cooking process, switch to a power level that

is appropriate for the intensity of the cooking vapours.

☞If the intensity of the cooking vapours does not subside,

switch to a higher power level.

☞Switch to the power level setting when searing.

The “P” display flashes. After 6 minutes, the extractor

hood automatically switches back to power level 3.

To activate the power level setting permanently, the

corresponding button must be pushed again. In this

case the extractor hood does not switch back and the “P”

display lights up.

☞Check the fresh air supply at regular intervals.

☞Also use the extractor hood to reduce other unpleasant

smells. Such as from:

yOnions and garlic

yOven, microwave and steamer

yFondue and raclette

☞Turn on the run-on function when you have finished

cooking.

☞Switch the extractor hood off after use. If the automatic

run-on function is activated, the run-on time (10 minutes)

starts in power level 1.

After 12 hours without operation, the extractor hood (incl.

lighting) automatically switches off.

Selecting additional functions is possible via the menu button.

☞Press the menu button.

yThe extraction changes the menu level.

yOnly the symbols of the functions available

in the respective menu level are displayed.

DThe functions are described in the

respective sections.

If no input is made, the operating group

changes back to menu level 1 after 2 seconds.

Every marking on the slider stands for the

function indicated by the symbol above the

marking.

☞Press the slider at the position below

the symbol to select the corresponding

function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Berbel BKF 90 iPP Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Berbel BKF 90 iPP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info