Bedienungsanleitung BH Fitness G 236 Monitor (Seite 6 von 24) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

528746

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

English

ELECTRONIC UNIT

The cables that you will have to connect, i.e. main

cable (M) and handgrip cables (X) (Y), are located

inside the monitor’s casing (G). Figure 1.

FITTING THE ELECTRONIC

MONITOR

FITTING THE MAIN CABLE Take cable (M) and

plug it into connecter (N), located at the back of

the electronic unit. Figure 2.

FITTING THE HAND-GRIP CABLE. Before

inserting the electronic unit (P) into the casing

(G), take hold of connector (U) for the right-hand

Hand Grip cable, sticking up out of the main

body and plug it into the right-hand connector

(O) at the back of the electronic unit. Do the

same with connector (Y) for the left-hand Hand

Grip cable, plugging it into the left-hand

connector (X) on the left-hand side of the

electronic unit, as shown in figure 3.

First slot the front of the electronic monitor (P)

into the top of the casing (G), as shown in Figure

4, then lower the monitor and click the clips (V)

into their housings

ELECTRONIC MONITOR To make control over

the exercise more comfortable and less

complicated, the lower section of the display on

this electronic device gives simultaneous readings

of time, distance and pulse rate, or alternatively,

revolutions per minute (RPM), speed, calories and

watts. The top of the display shows a graph for

the selected program, along with its number

(programs from 1 to 12), or a manual operation

graph for gauging the desired exercise settings.

There are 6 buttons at the bottom of the monitor:

- START/STOP:

Used to start or stop training.

- RESET:

1. This resets all of the measurements (time,

speed, calories,...) back to zero. To use it,

keep the RESET button pressed down for 2

seconds and this will reset the variables back

to zero.

2. To go back to the option for selecting

Manual, Program, User or Pulse mode.

- MODE:

To select each function (Time, distance,

calories, pulse rate,...)

+ (UP):

To move up through the settings

- (DOWN):

To move down through the settings

CHANGING FROM ONE WORK

MODE TO ANOTHER

This monitor allows you to work in 4 different

modes: Manual, Program, User (USER) and Pulse

(TARGET HR). In order to pass from one mode to

another press the START/STOP button to stop

the monitor, then press RESET and, with the help

of the ̆ and ̄ buttons, select the desired mode.

MANUAL MODE You can start exercising

straightaway after having selected Manual mode,

done by pressing the START/STOP button. The

applied braking force can be adjusted by using

the ̆ and ̄ buttons.

If you wish to program time, distance, calories,

watts and pulse settings, then press the MODE

button before beginning the exercise in order to

program in the values. Each time you press MODE

a different variable will flash, which you can set

by using ̆ and ̄. Once programmed, press

START/STOP.

PROGRAM MODE. After having selected

Program mode, press MODE and select the

desired training profile by using the ̆ and ̄

MONIT H-102 NDC 0190063 7/4/04, 16:016

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BH Fitness G 236 Monitor Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info