Bedienungsanleitung BH Fitness G690 Monitor LED Manual V7 (Seite 14 von 55) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

528710

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

SK LINE

sportkoncept

-Incline ▲

Increase inclination key When pressed during exercise this key will increase the level of

inclination by one degree. Inclination will continue to increase as long as this button is being pressed.

-quick / start.- Quick start key. When this key is pressed, provided that the LED on the key is flashing,

exercise will begin in manual mode after a 3 second countdown.

STARTING

Switching the monitor on: Plug the mains cable, supplied with the machine, into an electric mains socket,

making sure that the voltage is that stated for the machine and that the socket is equipped with an earth

connection Fig. (B)

Next, set the switch (b) to position [1]. Fig. (A).

Fig. (A) Fig. (B)

Once the monitor is on it will display the profile and the letter “M” for manual on the LED array ( A ) Figure 2,

and the “WELCOME TO HI – POWER” welcome message on the bottom alphanumeric screen ( B ).

By pressing the QUICK / START key the machine will start in manual mode after a 3 second countdown at

a speed of 3 km/h, by pressing the level▲

or level▼

keys you can increase or decrease the speed

settings. You can also increase or decrease the speed settings by using the numeric keys (F).

OPERATING INSTRUCTIONS

STARTING THE FAN. -

The monitor on this machine is fitted with an air vent (D), Fig. 1, through which a FAN provides two air speeds,

LOW and HIGH. To switch the fan on while exercising press the ON / OFF key on the keypad, Fig. 3, and the

fan will start. Whenever the monitor is switched to PAUSE the fan will switch off.

P0 MANUAL MODE.-

Once the monitor is on it will display the profile and the letter “M” for manual on the LED array ( A ) Fig. 2,

and the “WELCOME TO HI – POWER” welcome message on the bottom alphanumeric screen ( B ) Fig. 2.

By pressing the QUICK / START key the machine will start in manual mode after a 3 second countdown..

The flashing top LED array ( A ), Figure 2, will indicate the current speed setting for the exercise. By pressing

the level▲ or level▼ keys you can vary the speed between twenty different speed settings. You can also

increase or decrease the speed settings by using the numeric keys (F) Fig. 3.

The bottom alphanumeric display (B), Figure 2, will give alternating 10 second read-outs of the following

values: SPEED (Metric system km/h or imperial system mph) ; TIME ; CALORIES ; PULSE RATE and the

second sequence will show TIME, DISTANCE and INCLINE.

The program can be interrupted by pressing the STOP key or the EMERGENCY button (G) at the bottom of

the screen. When the program is stopped the bottom alphanumeric screen (B), Figure 2, will display the

average values for EXERCISE TIME (HH:MM:SS); DISTANCE TRAVELLED (km); AVERAGE SPEED

(Km/h); CALORIES CONSUMED (kcal) during the exercise. These values will be displayed twice every five

seconds.

If, during the time it takes to display these average values, no keys are touched and no further exercise is

done and the STOP key is pressed, the machine will go back to the manual program.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BH Fitness G690 Monitor LED Manual V7 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info