Bedienungsanleitung Bianco di puro Tune Pro (Seite 28 von 38) (Deutsch)

814571

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

EN EN

16 17

OPERATING IN MANUAL MODE

Manuel mode

When this mode is activated, all the program icons, the function buttons and the on-off switch will light up on the control

panel. In this mode, the 9 preset-programs, the manual mode with the speed steps 1 to 60 and the run time setting, as

well as the pulse mode in step 60 are available.

Set up run time

Using the left controlknob for setting your desired mixing time in 10-second intervals. The maximum running time is 10:00

minutes. It can be increased or decreased during mixing processes.

Set up speed level

Using the right controlknob for setting the speed level to your personal wishes. The speed level can be increased or decrea-

sed during mixing processes. Please note, that after choosing a speedlevel the blender starts immediately.

Start up manual mode (with selected runtime)

Choose your personal runtime for blending with the left controlknob. Now, you have to start the blender while selecting a

speedlevel. To end the mixing process prematurely in manual mode, tap the on-off switch. The mixing process is terminated

automatically after reaching the set runtime.

Start up manual mode (w/o selected runtime)

If the mixing process is to be used w/o selected runtime, the mixing process is started immediately by selecting a speed

level.

Pause during manual mode / pause button4;

If you want to pause in manual mode without stopping the mix, briefly tap this button once. During the pause mode the

symbol4; will flash up in white. Tap the pause button again to resume mixing.

Exit manual mode

To end the mixing process prematurely in manual mode, press once the on-off switch. This will work also with and w/o

selected runtime selection.

Pulse button

By press the pulse button shortly the pulse mode gets activated. The speedlevel display shows “60”. Press and hold the

button again to start the pulse mode. While the pulse mode is activated the on-off switch and the pulse button flash white

and the display shows the elapsed time. Release the button to end the pulse function.

OPERATING WITH THE TAMPER T42S

Using of the tamper you can remove any air bubbles, e.g. when preparing dough, in the jar, without touching the blades.

With the integrated temperature display you can make sure your foods are prepared gently.

Overview

Run the tamper only through the lid opening of the measuring cup. (see Fig. 2, page 1). Use only the provided tamper

and no other objects to press the mixing content towards the blades. The less liquid you use, the more you have to work

with the tamper. If you use other objects, the device can be damaged.

Vorsicht Caution

Benutzen Sie

den Stampfer

nicht ohne

aufgesetzten

Deckel.

Do not use the

tampfer without

the lid.

Benutzen Sie

den Stampfer

nur mit

aufgesetzten

Deckel.

Only use the

tamper when the

lid is attached.

T42S Verwendung nur mit / Use only with

Cube+ / Cube+ / Square+ / Canto

To measure the temperature in the jar, please proceed as follows:

• Switch on the tamper with the on-off switch

• Take the measuring cup off the lid, leave the lid on the jar.

• Now hold the tamper into the jar through the opening.

• The handle of the tamper displays the temperature in °C.

CHANGE THE TEMPERATURE DISPLAY

If the display shows the temperature in °F (Fahrenheit), you can change into °C (Celsius) by holding the

On-/Off-button of the tamper for 3 seconds.

Display

On-off switch

RollStop

NOTE WHEN USING THE TAMPER T42S

• When using the tamper, always hold the jar with one hand!

• If you use other objects, the blender jar as well as the motor may be irreparably damaged.

ATTENTION

• Make sure that the blender jar is properly closed before starting the blender!

• By selecting a speedlevel in manual mode the blender starts immediately!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bianco di puro Tune Pro Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info