Bedienungsanleitung Bianco di puro Tune Pro (Seite 29 von 38) (Deutsch)

814571

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

EN EN

18 19

SAFETY GUIDELINE FOR CLEANING

This chapter provides important tips for cleaning and maintenance and care of your Tune Pro.

Please note the following safety guidelines before and during cleaning of your Tune Pro:

• Pull the power plug from the power socket before cleaning!

• Do not open the housing of the device under any circumstances.

• If wet contacts touch the electrical components while charging, this can lead to an electric shock or even

death.

• Never place the power plug in water for cleaning.

• Never clean the power plug with a wet cloth.

• Never touch the power plug with wet hands.

BATTERY REPLACEMENT (BATTERY TYPE: CR 2032 QTY: 1)

• Unscrew the upper part of the housing by turning it anti-clockwise.

• Now carefully pull out the display from the tamper.

• Use a coin to remove the old battery and insert a fresh battery.

• Place the display into the grip and screw the upper part of the housing tight.

Dispose of the used old battery at the provided collection points

BATTERY REPLACEMENT OF TAMPER T42S CLEANING OF THE JAR (INCL. LID) AND MOTOR BASE

Cleaning of the jar and lid

• Clean the jar immediately after each use.

• The jar can be cleaned with a soft brush or dish cloth under running water.

• Do not use aggressive or abrasive cleaning agents or solvents.

• Clean the jar with a mild cleaning agent (detergent) or fill 2 cups of water into the jar, add some detergent, close the lid

(incl. measuring cup and seal ring) and press the Pulse button for some times.

• The silicone seal of the lid can be removed for easy cleaning. Before mixing make sure that the silicone seal is correctly

mounted again.

• When placing the jar onto the motor base, make sure that the contacts are completely dry.

• Please do not set the jar upside down when drying. Always set the jar on the base.

Cleaning of the motor base

• Clean the motor base with a soft and damp cloth,

• Do not use any aggressive cleaning agents or solvents,

• Never immerse the motor base in water or other fluids (danger of short circuit),

• Never rinse the motor base under running water (danger of short circuit).

Cleaning the tamper T42S

• Do not clean the display under running water or immerse the rammer in water or other liquids

• Use a lightly moistened cloth to clean..

• Do not clean the tamper in the dishwasher, otherwise the electronics will be damaged.

• Caution when cleaning

• Always remove the power plug from the socket and from the engine block before cleaning.

• The stainless steel blade can cause injury!

• The jar is not suitable for the dishwasher!

ATTENTION

Should water or other liquids get into the engine block, immediately unplug the power cord and contact

customer service, see chapter “Contact and Customer Service” on page 35.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bianco di puro Tune Pro Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info