Bedienungsanleitung Black Decker GL652 T3 (Seite 6 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

583276

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

ENGLISH

u Never touch the cutting line while the appliance is running.

u Do not put the appliance down until the cutting line has

come to a complete standstill.

u Use only the appropriate type of cutting line.

Never use metal cutting line or shing line.

u Be careful not to touch the line trimming blade.

u Take care to keep the mains cable away from the cutting

line. Always be aware of the position of the cable.

u Keep hands and feet away from the cutting line at all

times, especially when switching on the motor.

u Before using the appliance and after any impact, check for

signs of wear or damage and repair as necessary.

u Never operate the appliance with damaged guards or

without guards in place.

u Take care against injury from any device tted for trimming

the lament line length. After extending new cutter line

always return the machine to its normal operating position

before switching on.

u Always ensure that the ventilation slots are kept clear of

debris.

u Do not use the lawn trimmer (edge trimmer), if the cords

are damaged or worn.

u Keep extension cords away from cutting elements.

Labels on appliance

The following warning symbols are found on the appliance:

Read the manual prior to operation.

Wear safety glasses or goggles when operating this

appliance.

Keep people and animals at least 6 m away from the

cutting area.

Do not expose the appliance to rain or high humidity.

Electrical safety

This appliance is double insulated; therefore no earth

wire is required. Always check that the power supply

corresponds to the voltage on the rating plate.

u If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

This tool includes some or all of the following features.

1. Trigger lever (on/off switch)

2. Handle

3. Cable restraint

4. Power inlet

5. Secondary handle

6. Adjustment button

7. Cable storage hooks

8. Motor housing

9. Guard

10. Line trimming blade

11. Spool housing

12. Cutting line

13. Edge guide

14. Tube

Assembly

Warning! Before assembly, make sure that the tool is

switched off and unplugged.

Fittingtheguard(g.A)

u Remove the screw (15) from the guard (9).

u Place the guard onto the tool as shown.

u Firmly press the guard until it snaps into place.

u Secure the guard with the screw.

Warning! Never use the tool unless the guard is properly tted.

Connectingthetooltothemains(g.B)

u Connect the female plug of a suitable extension cable to

the power inlet (4).

u Loop the cable through the cable restraint (3).

u Insert the mains plug into a mains outlet.

For wired in cable units: Make sure the cable is looped

through the cable restraint prior to connecting the plug to

the mains outlet.

Warning! The extension cable must be suitable for outdoor use.

Settingthetooltotheworkingposition(g.C)

The tool is supplied in a shipping position. The tool must be

set to a working position before use.

u Gently pull out the tube (14) until the adjustment button (6)

locks into place.

u When the button locks into place, the tool is set to the

shortest working position.

Warning! Never use the tool unless it is in a working position.

Fittingtheedgeguide(g.D)

u Position the edge guide (13) in front of the tool as shown.

u Gently pull apart the edge guide legs.

u Slide the legs over the motor housing (8) into the holes

(16) on either side.

u Make sure the edge guide ts properly into the motor

housing guides.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GL652 T3 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info