Bedienungsanleitung Black Decker GL652 T3 (Seite 7 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

583276

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

ENGLISH

Residualrisks.

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks can not be avoided. These include:

u Injuries caused by touching any rotating/moving

parts.

u Injuries caused when changing any parts, blades or

accessories.

u Injuriescausedbyprolongeduseofatool.When

using any tool for prolonged periods ensure you take

regularbreaks.

u Impairmentofhearing.

u Health hazards caused by breathing dust developed

when using your tool (example:- working with wood,

especiallyoak,beechandMDF.)

Use

Warning! Let the tool work at its own pace. Do not overload.

Setting the tool to trimming or edging mode

(g.C,E&F)

The tool can be used in trimming mode as shown in g. E or

in edging mode to trim overhanging grass along lawn edges

and ower beds as shown in g. F.

Trimmingmode(g.C&E)

For trimming, the trimmer head should be in the position

shown in g. E. If it is not:

u Set the tool to the working position.

u Depress the adjustment button (6).

u Rotate the handle (2), while releasing the button.

u When the head is in position, the button will lock into place.

Note: The head will only rotate in one direction.

Edgingmode(g.C&F)

For edging, the trimmer head should be in the position shown

in g. F. If it is not:

u Set the tool to the working position.

u Depress the adjustment button (6).

u Rotate the handle (2), while releasing the button.

u When the head is in position, the button will lock into place.

Note: The head will only rotate in one direction.

Adjustingtheheightofthetool(g.C)

This tool has a telescopic mechanism, allowing you to set it to

a comfortable height. There are three height settings.

To adjust the height setting, proceed as follows:

u Depress the adjustment button (6).

u Gently pull the tube (14) in or out of the motor housing (2)

to the desired height, while releasing the button.

u When the tube is in position, the button will lock into place.

Switching on and off

u To switch the tool on, squeeze the trigger lever (1).

u To switch the tool off, release the trigger lever.

Warning! Never attempt to lock the trigger lever in the on

position.

Hints for optimum use

General

u In order to achieve optimum cutting results, only cut dry

grass.

Trimming

u Hold the tool as shown in g. E.

u Gently swing the trimmer from side to side.

u When cutting long grass, work in stages from the top.

Take small cuts.

u Keep the tool away from hard objects and delicate plants.

u If the tool starts running slowly, reduce the load.

Edging

Optimum cutting results are achieved on edges deeper than

50 mm.

u Do not use the tool to create edges. To create edges,

use an edging spade.

u Guide the tool as shown in g. F.

u To make a closer cut, slightly tilt the tool.

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

Warning! Before performing any maintenance, switch off and

unplug the tool.

u Regularly clean the ventilation slots in your tool using

a soft brush or dry cloth.

u Regularly clean the motor housing using a damp cloth.

Do not use any abrasive or solvent-based cleaner.

u Regularly clean the cutting line and spool using a soft

brush or dry cloth.

u Regularly use a blunt scraper to remove grass and dirt

from the underneath of the guard.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker GL652 T3 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info