Bedienungsanleitung Black Decker HVLP400 T1 (Seite 11 von 16) (Englisch)

578633

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

ENGLISH

(Original instructions)

Maintenance and cleaning

Your Black & Decker corded appliance has been designed to

operate over a long period of time with a minimum of main-

tenance. Continuous satisfactory operation depends upon

proper appliance care and regular cleaning.

Warning! Be sure to use appropriate personal protective

equipment.

Warning! Before performing any maintenance or cleaning on

corded appliances switch off and unplug the appliance.

Warning! Do not use materials with a ashpoint lower than

55°C. Flashpoint is the temperature that a uid can produce

enough vapours to ignite (see paint supplier instructions).

Warning! Make sure clean up area is well ventilated and free

of ammable vapours.

Warning! Always spray outdoors when spraying cleaning

solution through sprayer.

Warning! Do not submerse power unit.

Flushing the sprayer (g. O)

u Turn the power unit off, unplug the cord and disconnect air

hose from sprayer.

u Unscrew the lid from the side of the canister and pour any

remaining liquid back into the original container (g. O).

u Pour a small amount of the appropriate cleaning solution

into the canister.

t Warm soapy water for water based materials.

t Manufacturers recommended cleaning solution for oil

based materials.

u Replace the lid on the canister securely and vigorously

shake the sprayer.

u Unscrew the lid from the side of the canister and properly

dispose of cleaning solution.

u Rell the canister with a small amount of new cleaning

solution. Screw lid securely on canister.

u Reattach the air hose to the sprayer, plug in the cord and

turn on the power unit.

u Spray the cleaning solution through the sprayer onto scrap

material for 2 to 3 seconds.

Cleaning the sprayer (g. P - T)

u Turn the power unit off, unplug the cord and disconnect air

hose from sprayer.

u Remove the side ll canister (6) and unscrew the side lid

(7). Remove the pickup tube (15) and o-ring (17) from the

sprayer. Clean the parts in the appropriate cleaning solu-

tion (g. P).

u Unscrew the tip collar (19) and remove the spray nozzle

(10) and spray tip (20). Clean all parts in the appropriate

cleaning solution (g. Q).

u If using water based material, clean the sprayer by running

water through pickup tube inlet. If using oil based materi-

als, clean pickup tube inlet with the appropriate cleaning

solution. Repeat until sprayer is completely clean. Take

special care to gently clean the spraying needle (21).

u Dry all parts thoroughly.

u Properly dispose of cleaning solution.

u Place a drop of household oil onto the metal ball in the

check valve (18) (g. R).

Important : Lubricating the ball in check valve (18), after

cleanup, will help to prevent it from sticking which can clog the

valve and prevent adequate ow of spray material.

u Reassemble sprayer (g. S).

Note : The spray tip (20) can only go in one way. The notch

(22) on the spray tip must align with the recess in the threads

of the sprayer (g. 3).

Cleaning the power unit

u Turn the power unit off, unplug the cord and disconnect air

hose from sprayer.

u Use only mild soap and damp cloth to clean the power

unit.

Warning! Never let any liquid get inside the power unit.

Warning! Never immerse any part of the power unit into a

liquid.

Cleaning the lter

The power unit contains a washable/reusable lter (g. U).

Check the lter before and after each use. If dirty, wash with

warm water and allow to air dry before re-installing or replace

if necessary.

u To check the lter, remove the lter cover (11) by pressing

in on the sides of the lter cover and pulling the cover off

the power unit.

u Remove the lter (23) and inspect.

u Replace the lter and lter cover.

Warning! Never operate the power unit without the lter in

place. Debris could be sucked in and interfere with the func-

tion of the power unit.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be tted:

u Safely dispose of the old plug.

u Connect the brown lead to the live terminal in the new

plug.

u Connect the blue lead to the neutral terminal.

u Connect the green/yellow lead to the earth terminal.

Warning! Follow the tting instructions supplied with good

quality plugs. Recommended fuse: 13A.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Black Decker HVLP400 T1 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Black Decker HVLP400 T1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info