Bedienungsanleitung Bosch AdvancedGrind 18 (Seite 21 von 293) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

707739

Zoom out

Zoom in

Vorherige Seite

1/293

Nächste Seite

English | 21

Bosch Power Tools 1 609 92A 47W | (24.11.17)

Protection Guard for Cutting

 For cutting with bonded abrasives, always use the

protection guard for cutting 12.

The protection guard for cutting 12 is mounted in the same

manner as the protection guard for grinding 11.

Auxiliary Handle

 Operate your machine only with the auxiliary handle 8.

Screw the auxiliary handle 8 on the right or left of the machine

head depending on the working method.

Hand Guard

 For operations with the rubber sanding plate 19 or with

the cup brush/wheel brush/flap disc, always mount the

hand guard 18.

The hand guard 18 is fastened with the auxiliary handle 8.

Mounting the Grinding Tools

 Before any work on the machine itself (e. g. mainte-

nance, tool change, etc.) as well as during transport

and storage, remove the battery from the power tool.

There is danger of injury when unintentionally actuating

the On/Off switch.

 Do not touch grinding and cutting discs before they

have cooled down. The discs can become very hot while

working.

Clean the grinder spindle 10 and all parts to be mounted.

For clamping and loosening the grinding tools, lock the grind-

er spindle with the spindle lock button 2.

 Actuate the spindle lock button only when the grinder

spindle is at a standstill. Otherwise, the machine may be-

come damaged.

Grinding/Cutting Disc

 Always use the quick-clamping nut 17 to mount the

grinding and cutting discs.

Pay attention to the dimensions of the grinding tools. The

mounting hole diameter must fit the mounting flange without

play. Do not use reducers or adapters.

When using diamond cutting discs, make sure that the arrow

indicating the direction of rotation on the diamond cutting

disc matches the direction of rotation of the power tool (see

the direction of rotation arrow 9 on the machine head).

See graphics page for the mounting sequence.

A plastic part (O-ring) is fitted around

the centring collar of mounting flange

13. If the O-ring is missing or dam-

aged, the mounting flange 13 must

be replaced before resuming opera-

tion.

Use the quick-clamping nut 17 to secure the grinding/cutting

disc without the need for additional tools.

Fold up the bar on the quick-clamp-

ing nut 17 and screw the quick-

clamping nut 17 onto the locked

spindle.

Tighten the quick-clamping nut 17 by

hand.

Fold down the bar to secure the

quick-clamping nut 17.

To release the grinding/cutting disc,

fold up the bar on the quick-clamping

nut 17.

Unscrew the quick-clamping nut 17

to remove it from the locked spindle.

 After mounting the grinding tool, and before switching

on, check whether the bar on the quick-clamping nut

17 is folded down.

 After mounting the grinding tool and before switching

on, check that the grinding tool is correctly mounted

and that it can turn freely. Make sure that the grinding

tool does not graze against the protection guard or

other parts.

Flap Disc

 For operations with the flap disc, always mount the

hand guard 18.

Rubber Sanding Plate

 For operations with the rubber sanding plate 19,

always mount the hand guard 18.

See graphics page for the mounting sequence.

Screw on the round nut 21 and tighten with the two-pin

spanner.

Cup Brush/Disc Brush

 For operations with the cup brush/wheel brush, always

mount the hand guard 18.

See graphics page for the mounting sequence.

The cup brush/disc brush must be able to be screwed onto

the grinder spindle until it rests firmly against the grinder

spindle flange at the end of the grinder spindle threads.

Tighten the cup brush/disc brush with an open-end spanner.

Carbide grinding head

 A grinding head may be used only with a suitable pro-

tective guard.

OBJ_BUCH-2850-004.book Page 21 Friday, November 24, 2017 11:44 AM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch AdvancedGrind 18 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info