Bedienungsanleitung Bosch AdvancedImpact 900 (Seite 17 von 107) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

707745

Zoom out

Zoom in

Vorherige Seite

1/107

Nächste Seite

English | 17

Impact drill AdvancedImpact 900 AdvancedImpact 900 +

Drill Assistant

Max. drilling diameter (first/second gear)

– Masonry mm 20/16 20/16

– Concrete mm –/18 –/18

– Steel mm 13/8 13/8

– Wood mm 40/25 40/25

– with dust container mounted mm – 10

Chuck capacity mm 1.5–13 1.5–13

Weight according to

EPTA-Procedure 01:2014

kg 2.6 2.8

Protection class

/ II / II

The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Noise/vibration information

Noise emission values determined according to

EN62841-2-1.

Typically, the A-weighted noise level of the power tool is:

Sound pressure level 96dB(A); sound power level

107dB(A). Uncertainty K=5dB.

Wear hearing protection!

Vibration total values a

(triax vector sum) and uncertainty K

determined according to EN62841-2-1:

Drilling into metal: a

=6.5 m/s

, K=1.5 m/s

Impact drilling into concrete: a

=20 m/s

, K=1.5 m/s

Screwdriving: a

<2.5 m/s

, K=1.5 m/s

The vibration level and noise emission value given in these

instructions have been measured in accordance with a

standardised measuring procedure and may be used to com-

pare power tools. They may also be used for a preliminary

estimation of vibration and noise emissions.

The stated vibration level and noise emission value repres-

ent the main applications of the power tool. However, if the

power tool is used for other applications, with different ap-

plication tools or is poorly maintained, the vibration level

and noise emission value may differ. This may significantly

increase the vibration and noise emissions over the total

working period.

To estimate vibration and noise emissions accurately, the

times when the tool is switched off or when it is running but

not actually being used should also be taken into account.

This may significantly reduce vibration and noise emissions

over the total working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping their hands warm,

and organising workflows correctly.

Assembly

u Pull the plug out of the socket before carrying out any

work on the power tool.

Auxiliary Handle (seefigureA)

u Do not operate your power tool without the auxiliary

handle (9).

u Before any work, make sure that the wing bolt (18)/

(21) is tightened. Loss of control can cause personal in-

jury.

You can adjust the auxiliary handle(9) to any of four posi-

tions in order to achieve a safe work posture that minimises

fatigue.

Turn the wing bolt(21)/(18) anticlockwise and guide the

auxiliary handle(9) in the required position over the drill

chuck onto the spindle collar of the power tool.

Turn the wing bolt(21)/(18) clockwise to retighten it.

Setting the Drilling Depth (seefigureB)

You can use the depth stop(23) to set the required drilling

depth X.

Press the button for depth stop adjustment (22) and insert

the depth stop into the auxiliary handle (9).

The fluting on the depth stop (23) must face downwards.

Pull the depth stop far enough out that the distance between

the drill bit tip and the edge of the depth stop corresponds

to the required drilling depth X.

Drill Assistant

Applying the Drill Assistant (seefiguresC–D)

The Drill Assistant (10) can be used with and without the

dust collection device(13). Use of the dust collection

device(13) is limited to drill bits with a diameter of 12 mm

and a length of 120 mm.

Attach the dust collection device(13) to the adapter(26).

Press the unlocking button(8) to release the Drill Assistant

(10) from its parked position.

Guide the Drill Assistant (10) over the drill chuck onto the

spindle collar of the power tool.

Lock it by turning the wing bolt(18) clockwise.

Setting the Drilling Depth (seefiguresE–F)

Attach the drill bit (see section "Changing the Tool").

You can use the setting ring(17) to set the required drilling

depthX.

Bosch Power Tools 1 609 92A 57F | (27.08.2019)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch AdvancedImpact 900 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info