697454
40
Zoom out
Zoom in
Vorherige Seite
1/170
Nächste Seite
40 en | Settings AMAX panel
2019.08 | 11 | F.01U.309.277 Installation Manual Bosch Security Systems B.V.
In case of zone tamper event, the tamper report will be sent. When zone tamper recovers, the
system status report will be sent.
AWAY arm / disarm report
The system disarming report is sent at the disarming command and the system arming report
is sent when the arming succeeds.
Duress report
The duress report is sent at the disarming command. The duress report will not be sent in the
operation of arming, but sent with ordinary disarming report. The duress report has no
corresponding alarm recovery report.
Key switch arming
Sends system arming report when the transient key switch or locking key switch is used to
arm areas.
Quick arming
Sends system arming report when the keypad is used for quick arming.
Telephone arming
Sends system arming report when the telephone is used for arming of the panel.
Telephone arming is only available when the system is configured for no other area than area
1.
RPC arming
Sends system arming report when the remote PC is used to arm areas through network or
telephone connection.
STAY arm / disarm report
The perimeter disarming report is sent at the disarming command and the perimeter arming
report is sent when the arming succeeds.
Quick arming
Sends perimeter arming report when the keypad is used for quick arming.
RPC arming
Sends perimeter arming report when the remote PC is used to arm areas through network or
telephone connection.
AC fault report recovery
When the system detects a recovery of the AC power that lasts longer than the AC power
delay report time, the report will be sent.
AC fault report domestic
When the system detects disconnection of AC power and after the AC fault delay time has
ended, the report will be sent.
System status reports
External module fault reports
System tamper report and recovery report
Zone expansion module fault report and recovery report for zone expansion module
1 - 6
Output expansion module fault report and recovery report for output expansion
module 1 or 2
Network module fault report and recovery report for network module 1 or 2
40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Bosch AMAX panel 4000 EN wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Bosch AMAX panel 4000 EN

Bosch AMAX panel 4000 EN Kurzanleitung - Deutsch - 76 seiten

Bosch AMAX panel 4000 EN Kurzanleitung - Holländisch - 76 seiten

Bosch AMAX panel 4000 EN Installationsanweisung - Holländisch - 190 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info