Bedienungsanleitung Bosch CDG634BS1 (Seite 26 von 36) (Englisch)

563426

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

en Trouble shooting

--------

:Warning

Risk of electric shock!

Incorrect repairs are dangerous. Repairs may only be

carried out and damaged power cables replaced by

one of our trained after-sales technicians. If the

appliance is defective, unplug the appliance from the

mains or switch off the circuit breaker in the fuse box.

Contact the after-sales service.

Error messages on the display

When an error message appears on the display with "D"

or "E", e.g. D0111 or E0111, switch the appliance off

and on again using the ÿ On/Off button.

If it was a one-off error, the display goes out. If the error

message appears again, call the after-sales service and

quote the exact error message.

Replacing the cooking compartment bulb

Heat-resistant 230 V/25 W halogen bulbs with seals are

available from the after-sales service. Please specify the

E number and FD number of your appliance.

:Warning

Risk of electric shock!

When replacing the cooking compartment bulb, the

bulb socket contacts are live. Before replacing the bulb,

unplug the appliance from the mains or switch off the

circuit breaker in the fuse box.

:Warning

Risk of burns!

The appliance becomes very hot. Never touch the

interior surfaces of the cooking compartment or the

heating elements. Always allow the appliance to cool

down. Keep children at a safe distance.

1. Unplug the appliance from the mains or switch off

the circuit breaker in the fuse box.

2. Turn the cover anti-clockwise to remove it.

3. Remove the bulb.

Insert the new bulb, making sure that the pins are in

the correct position.Push the bulb in firmly.

Caution!

Only operate the appliance with the glass cover and

seals.

4. Slide the new seals and the clamping ring onto the

glass cover in the right order.

5. Screw the glass cover with the seals back on again.

6. Connect the appliance to the power supply and

carry out commissioning again.

Buttons flash Normal occurrence caused by

condensation behind the con-

trol panel

As soon as the condensation has evaporated, the buttons no longer flash

Liquid in the evaporator dish has fully

evaporated, even though the water

tank is full

The water tank has not been

inserted properly

Push in the water tank completely until you feel it engage

The feed line to the water

tank is blocked

Descale the appliance

Check the set water hardness range and change it, if necessary

The water tank empties for no dis-

cernible reason. The evaporator dish

overflows

The water tank was not

closed properly

Close the lid until you feel it lock into place

The tank lid seal is dirty Clean the seal

The tank lid seal is faulty Obtain a new water tank from the after-sales service

The appliance's display prompts you

to fill up the water tank even though it

is full.

The water tank has not been

inserted properly

Push in the water tank completely until you feel it engage

The detection system is not

working

Call the after-sales service

The appliance's display prompts you

to fill up the water tank even though it

is not yet empty, or the water tank is

empty but no corresponding message

appears on the display

The water tank is dirty.The

moving water level indicators

are jammed

Shake and clean the water tank. If the jammed parts cannot be freed, obtain a

new water tank from the after-sales service

When you cook with steam, a lot of

steam is produced

The appliance is being auto-

matically calibrated

Normal procedure

When cooking with steam, a lot of

steam is produced repeatedly

The appliance is unable to cal-

ibrate itself automatically if

cooking times are too short

Reset the appliance to the factory settings and repeat the calibration process

Steam escapes from the ventilation

slots during cooking

Normal procedure Not possible

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch CDG634BS1 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch CDG634BS1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info