en Cleaning
22
DCleaning
C eani ng
With good care and cleaning, your appliance will retain
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your appliance.
:Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
:Warning – Risk of electric shock!
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
:Warning – Risk of injury!
Scratched glass in the appliance door may develop into
a crack. Do not use a glass scraper, sharp or abrasive
cleaning aids or detergents.
Note: Unpleasant odours, for example after fish has
been prepared, can be removed very easily. Add a few
drops of lemon juice to a cup of water. Always place a
spoon in the container to prevent delayed boiling. Heat
the water for 1 to 2 minutes at maximum microwave
output.
Suitable cleaning agents
To ensure that the different surfaces are not damaged
by using the wrong cleaning agent, observe the
information in the table. Depending on the appliance
model, not all of the areas listed may be on/in your
appliance.
Caution!
Risk of surface damage
Do not use:
■Harsh or abrasive cleaning agents,
■Cleaning agents with a high alcohol content,
■Hard scouring pads or cleaning sponges,
■High-pressure cleaners or steam cleaners,
■Special cleaners for cleaning the appliance while it is
hot.
Wash new sponge cloths thoroughly before use.
Tip: Highly recommended cleaning and care products
can be purchased through the after-sales service.
Observe the respective manufacturer's instructions.
Microfibre cloth
The microfibre cloth is especially suitable for cleaning
easily damaged surfaces, such as glass, glass ceramic,
stainless steel or aluminium. It removes liquid and
greasy deposits in one go.
Order no. 466 148
Conditioning cloth for stainless steel surfaces
You can treat surfaces with a tested, recommended oil-
impregnated conditioning cloth (available from us),
which will make the surface more resistant to
fingerprints and scratches.
Order no. 311 134
Conditioning oil for modern stainless steel surfaces
This is the same conditioning oil that is used in the
cloths, and can be ordered from us in a bottle.
Order no. 311 567
Degreaser
For intensive removal of stubborn grease deposits from
surfaces.
Order no. 311 781
Notes
■Slight differences in colour on the front of the
appliance are caused by the use of different
materials, such as glass, plastic and metal.
■Shadows on the door panels, which look like
streaks, are caused by reflections made by the
interior lighting.
Area Cleaning products
Appliance front Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. Do not use glass cleaners or metal or
glass scrapers for cleaning.
Display Wipe down using a microfibre cloth or a
slightly damp cloth. Do not wipe with a wet
cloth.
Appliance front with
stainless steel
Hot soapy water:
Clean with a dish cloth and dry with a soft
cloth. Remove patches and splashes of limes-
cale, grease, starch and albumin (e.g. egg
white) immediately. Corrosion can form under
these patches or splashes. Special stainless-
steel cleaning products are available from our
after-sales service or from specialist retailers.
Do not use glass cleaners or metal or glass
scrapers for cleaning.
Stainless steel cooking
compartment
Hot soapy water or a vinegar solution:
Clean with a dish cloth and dry with a soft
cloth.
If the oven is very dirty, use oven cleaner, but
only when the cooking compartment is cold. It
is best to use a stainless-steel sponge. Do not
use oven spray or any other aggressive oven
cleaners or abrasive materials. Scouring
pads, rough sponges and pan cleaners are
also unsuitable. These items scratch the sur-
face. Allow the interior surfaces to dry thor-
oughly.
Recess in the cooking
compartment
Damp cloth:
Water must not be allowed to run into the
appliance through the turntable drive.
Turntable and roller
ring
Hot soapy water:
When placing the turntable back into its
recess, it must engage properly.
Wire rack Hot soapy water:
Clean using stainless-steel cleaner or clean in
the dishwasher.
Door panels Glass cleaner:
Clean with a dish cloth. Do not use glass
scrapers.
Seal Hot soapy water:
Clean with a dish cloth and do not scour. Do
not use metal or glass scrapers for cleaning.
Accessories Hot soapy water:
Soak and then clean with a dish cloth or a
brush.
Trouble en
23
3Trouble shooting
Tr oubl e s hoot i ng
If a fault occurs, there is often a simple explanation.
Before calling the after-sales service, please refer to the
fault table and attempt to correct the fault yourself.
:Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
You can take remedial action yourself for some error
messages.
Troubleshooting
Error message Possible cause Remedy/Note
The appliance does not work The plug is not plugged in. Plug the plug in
Power failure Check whether the kitchen light works.
The fuse is faulty Check in the fuse box to make sure that the fuse for
the appliance is OK.
Faulty operation Switch off the fuse in the fuse box. Switch it back on
after approx. 10 seconds.
‚ƒ: ‹‹ flashes in the display and the
0 symbol lights up.
Power failure Reset the clock.
The appliance is not operating. A cooking
time is shown in the display.
start l stop was not touched after the setting
was made.
Touch start l stop or delete the setting by using the
function selector to select another function.
The microwave is not working. The door has not been properly closed. Check whether food residue or debris is trapped in
the door.
start l stop was not touched. Touch start l stop.
It is taking longer than usual for food to
heat up
The microwave power output has been set too
low.
Select a higher microwave power output.
A larger amount of food than usual has been
placed in the appliance.
Double the amount – double the time.
The food was colder than usual. Stir or turn the food during cooking.
Microwave operation has been cancelled
for no apparent reason.
The microwave has a fault. If this fault recurs, call our customer service.
The appliance can be set, but does not
heat up. The colon flashes.
The appliance is in demo mode. Deactivate demo mode in the basic settings.
Note: Demo mode is only visible in the first 5 minutes
after connecting the appliance to the mains.
“‚ is indicated on the display panel. The thermal safety switch-off function has been
activated.
Call customer service.
“ƒ is indicated on the display panel. The automatic safety switch-off function has been
activated.
Touch any button or turn the rotary selector.
“„ is indicated on the display panel. The oven is malfunctioning. Call customer service.
“… is indicated on the display panel. The thermal safety switch-off function has been
activated.
Call customer service.
“‚‚ is indicated on the display panel. Moisture in the control panel. Allow the control panel to dry.
“‚ˆ is indicated on the display panel. Rapid heating has failed. Call customer service.
