Bedienungsanleitung Bosch GWS 24-230 JBX (Seite 20 von 135) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

79055

Zoom out

Zoom in

Vorherige Seite

1/135

Nächste Seite

English - 6

Auxiliary Handle

■ For all work with the machine, the auxiliary

handle must be mounted.

Screw the auxiliary handle 4 into the head of the

machine according to the working method.

Vibration-dampening Auxiliary Handle

The vibration-dampening auxiliary handle re-

duces the vibrations, making operation more

comfortable and secure.

Do not make any alterations to the aux-

iliary handle.

Do not continue to use an auxiliary handle if it is

damaged.

Hand Guard

For work with the rubber sanding plate 19 or with

the cup brush 22/disc brush/flap disc, the hand

guard 18 (accessory) is to be mounted.

The hand guard 18 is fastened with the auxiliary

handle 4.

■ Before any work on the machine itself, pull the

mains plug.

Grinding and cutting discs become very hot

while working; do not touch until they have

cooled.

It is recommended to use the quick-clamping

nut 11. When using the clamping nut 16 in-

creased effort to loosen the clamping nut must be

taken into account.

Clean the grinder spindle and all parts to be

mounted. For clamping and loosening the grind-

ing tools, lock the grinder spindle 6 with the spin-

dle lock button 2.

Actuate the spindle lock button 2 only when

the grinder spindle is at a standstill!

Quick Clamping Nut

When using the quick-clamping nut 11, grinding

tools can be mounted without additional tools.

Use only a flawless, undamaged quick-clamp-

ing nut 11.

When screwing on, take care that the side

with printing does not point to the grinding

disc. The arrow must point to the index

mark 28.

Lock the grinder

spindle with the spin-

dle lock button 2.

Tighten the quick-

clamping nut by

firmly turning the

grinding disc in clock-

wise direction.

A properly attached,

undamaged quick-

clamping nut can be

loosened by hand

when turning the

knurled ring in anti-

clockwise direction.

Never loosen a tight

quick-clamping nut

with pliers. Always

use the two-pin

spanner. Insert the

two-pin spanner as

shown in the illustra-

tion.

Grinding/Cutting Disc

Pay attention to the dimensions of the grind-

ing disc. The mounting hole diameter must fit

the mounting flange 5 without play. Do not

use reducers or adapters.

When using a diamond cutting disc, take care

that the direction-of-rotation arrow on the dia-

mond cutting disc and the direction of rotation of

the machine (direction-of-rotation arrow on the

machine head) agree.

For mounting, see the illustration page.

Position the grinding/cutting disc onto the mount-

ing flange 5. Ensure that the grinding tool is

seated centred and without play on the mounting

flange.

Screw on the quick-clamping nut 11 and tighten

the grinding disc.

☞

After mounting the grinding tool and be-

fore switching on, check that the grind-

ing tool is correctly mounted and that it

can turn freely.

Mounting the Grinding Tools

1 609 929 H82.book Seite 6 Dienstag, 3. Mai 2005 3:11 15

21 • 1 609 929 H82 • TMS • 28.04.05

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch GWS 24-230 JBX Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info