Bedienungsanleitung Bosch HBC 26D553 (Seite 6 von 28) (Englisch)

110637

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Automatic calibration

The boiling temperature of water depends on the air pressure.

During calibration, the appliance is adapted to the pressure

conditions in the location where it is installed. This happens

automatically when you first use the appliance (see section:

First use). More steam develops than usual.

It is important that the appliance steams without interruption for

20 minutes at 100 °C. Do not open the appliance door during

this time.

If the appliance was not able to calibrate itself automatically (for

example, because the appliance door was opened), the

calibration process is carried out again during the next cooking

operation.

After moving house

So that the appliance automatically adjusts itself to its new

location, you must reset the appliance to the factory settings

(see section: Basic settings) and repeat the initial start-up

process (see section: First use).

After a power cut

The appliance saves the calibration settings even in the event

of a power cut or disconnection from the mains. Recalibration

is not necessary.

Before using the appliance for the first time

In this section you will find out which steps are required before

using the appliance for the first time:

■ Setting the clock and language

■ Setting the water hardness range

■ Starting the appliance for the first time

■ cleaning the accessories before use

Setting the clock and language

Once your new appliance has been connected to the mains,

“Set clock” appears in the display. Set the clock and the

language for the display, if required.

1.Press the X button to switch to the preset time.

2.Set the current time using the rotary selector.

3.Press the Y button to switch back to “Clock”.

4.Switch to “Select language” using the rotary selector.

5.Switch to “English” using the X button.

6.Set the required language using the rotary selector.

There is a choice of 30 different languages.

7.Press the 0 button.

The time and language are applied. The current time is

displayed.

Setting the water hardness range

Descale your appliance regularly. This is the only way to

prevent damage.

Your appliance automatically displays when it needs descaling.

It has been preset to water hardness range "medium". Change

the value if your water is softer or harder.

You can check the water hardness with the test strips supplied

or ask your water supplier.

If your water is very hard, we recommend that you use softened

water.

You can only dispense with descaling completely if you

exclusively use softened water. If this is the case, change the

water hardness to "softened".

You can change the water hardness range in the basic settings

when the appliance is switched off.

1.If required, press the % button to switch off the appliance.

2.Press and hold the ° button until "Select language" appears in

the display.

3.Turn the rotary selector until "Water hardness range" appears.

4.Press the X button.

"2-medium" is highlighted in the display.

5.Change the water hardness range using the rotary selector.

Possible values:

6.Press the ° button to exit the basic settings.

The change is saved.

Before first use

Before using the appliance for the first time, heat it up while still

empty in the “Steam” type of heating to 100 °C for 20 minutes.

Do not open the appliance door during this time. The appliance

is automatically calibrated (see section: Automatic calibration).

1.Press the % button to switch on the appliance.

After approx. 4 seconds, the “Steam” type of heating

appears.

2.Fill and insert the water tank (see section: Filling the water

tank).

Before using for the first time, moisten the seal in the tank

cover with a little water.

Cooking container, solid, GN

Y, 40 mm

deep

HEZ36D153

Cooking container, perforated, GN

40 mm deep

HEZ36D153G

Wire rack HEZ36DR

Cleaning sponge 643 254

Descaler 311 138

Honeycomb microfibre cloth 460 770

Accessories Order no.



2EHU8QWHUKLW]H

&



8KU]HLWHLQVWHOOHQ

8KU]HLW



PLWVFKOLHHQ

softened -

1-soft I

2-medium II

3-hard III

4very hard IV

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch HBC 26D553 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch HBC 26D553

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info