Bedienungsanleitung Bosch HBC 26D553 (Seite 7 von 28) (Englisch)

110637

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

3. Press the n button.

The appliance heats up to 100 °C. The cooking time

(20 minutes) does not start to count down until the set

temperature has been reached. Do not open the appliance

door during this time.

The cooking operation automatically ends and a signal

sounds.

4. Press the % button to switch off the appliance.

Leave the appliance door ajar until the appliance has cooled

down.

Cleaning the accessories before use

Using soapy water and a soft cloth, clean the accessories

thoroughly before first use.

Operating the appliance

In this section, you can read about

■ how to fill the water tank

■ how to switch the appliance on and off

■ what to note after each use

■ how you can use the recommended settings

Filling the water tank

When you open the appliance door, you will see the water tank

on the right-hand side.

Caution!

Use of unsuitable liquids may damage the appliance

■ Only use fresh tap water, softened water or uncarbonated

mineral water.

■ If your tap water is very hard, we recommend that you use

softened water.

■ Do not use distilled water, highly chlorinated tap water

(> 40 mg/l) or other liquids.

You can obtain information about your tap water from your

water supplier. The water hardness can be checked with the

test strips enclosed.

Fill the water tank before each use:

1. Open the appliance door and take out the water tank.

2. Fill the water tank with cold water up to the "max" mark.

3. Close the tank cover until you feel it engage.

4. Slide in the water tank until it engages.

Switching on the appliance

1. Press the % button to switch on the appliance.

The button description appears in the display for

approximately 4 seconds. The display then switches

automatically to the “Types of heating” menu.

Or press the

è button to go directly to the “Types of heating”

menu.

2. Turn the rotary selector to set the desired type of heating.

3. Press the X button.

The recommended temperature is highlighted.

4. Turn the rotary selector to set the desired temperature.

5. Press the 0 button.

6. Switch to cooking time using the rotary selector.

7. Press the X button.

The default cooking time is highlighted.

8. Turn the rotary selector to set the required cooking time.

9. Press the n button to start the cooking operation.

The appliance heats up.

For the Steam type of heating, the cooking time starts

counting down after the heating-up time.

"Fill water tank?" message

This message appears if you set a type of heating and the

water tank is only half full.

If you think that the water in the water tank is sufficient for the

cooking procedure, you can start the appliance. If not, fill the

water tank to the "max" mark, slide it back in and start the

appliance.

Current temperature

Press the

° button.

The current temperature is displayed for 3 seconds.

PD[

Type of heating Temperature range

Steam 35 - 100 °C

Reheat 80 - 100 °C

Prove 35 - 50 °C

Defrosting 35 - 60 °C



7RSERWWRPKHDWLQJ



&



7\SHVRIKHDWLQJ

6WHDP

&

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch HBC 26D553 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch HBC 26D553

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info