Bedienungsanleitung Bosch HBC 33B550 (Seite 11 von 24) (Englisch)

70236

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Changing the basic settings

Your oven has various basic settings. These settings can be

customised to suit your requirements.

No other time-setting option should have been set.

1. Press and hold the 0 button for approx. 4 seconds.

The current basic setting for the clock display is shown in the

display, e.g. c1 1 for selection 1.

2. Use the @ or A button to change the basic setting.

3. Confirm by pressing the 0 button.

The next basic setting appears in the display. You can scroll

through all levels with the

0 button and change the setting

with the

@ or A button.

4. To finish, press and hold the 0 button for approx. 4 seconds.

All basic settings are applied.

You may change the basic settings at any time.

Care and cleaning

With good care and cleaning, your oven will remain clean and

fully-functioning for a long time to come. Here we will explain

how to maintain and clean your oven correctly.

Notes

■ Slight differences in the colours on the front of the oven are

caused by the use of different materials, such as glass,

plastic and metal.

■ Shadows on the door panel which look like streaks, are

caused by reflections made by the oven light.

■ Enamel is baked on at very high temperatures. This can

cause some slight colour variations. This is normal and does

not affect their function. The edges of thin trays cannot be

completely enamelled. As a result, these edges can be

rough. This will not impair the anti-corrosion protection.

Cleaning agents

To ensure that the different surfaces are not damaged by using

the wrong type of cleaning agent, observe the information in the

table. Do not use

■ harsh or abrasive cleaning agents,

■ cleaning agents with a high concentration of alcohol,

■ hard scouring pads or sponges,

■ high-pressure cleaners or steam cleaners.

Wash new sponge cloths thoroughly before use.

Cleaning the self-cleaning surfaces in the cooking

compartment

The back wall in the cooking compartment is coated with a

highly porous ceramic layer. This coating absorbs and

disintegrates splashes from baking and roasting while the oven

is in operation. The higher the temperature and the longer the

oven is in operation, the better the result will be.

If splashes are still visible even after repeated use, proceed as

follows:

1. Clean the floor, ceiling and side panels of the cooking

compartment thoroughly.

2. Set : 3D hot air.

3. With the door closed, heat up the empty oven for

approximately 2 hours at maximum temperature.

The ceramic coating is regenerated. When the cooking

compartment has cooled down, remove the brown or white

residue with water and a soft sponge.

Light discolouration of the coating does not affect automatic

self-cleaning.

Basic setting Selection 1 Selection 2 Selection 3

c1 Clock display always* only with

the

0 but-

ton

c2 Signal duration

upon completion of

a cooking time or

timer period

approx.

10 seconds

approx.

2 minutes*

approx.

5 minutes

c3 Waiting time until a

setting is applied

approx.

2seconds

approx.

5seconds*

approx.

10 seconds

* Factory setting

Area Cleaning agents

Oven front Hot soapy water:

Clean with a dish cloth and dry with a soft

cloth. Do not use glass cleaners or glass

scrapers.

Stainless steel Hot soapy water:

Clean with a dish cloth and dry with a soft

cloth. Remove traces of limescale, grease,

starch and albumin (e.g. egg white) immedi-

ately. Corrosion can form under such resi-

dues.

Special stainless steel cleaning products

suitable for hot surfaces are available from

our after-sales service or from specialist

retailers. Apply a very thin layer of the

cleaning product with a soft cloth.

Door panels Glass cleaner:

Clean with a soft cloth. Do not use a glass

scraper.

Glass cover for

the oven light

Hot soapy water:

Clean with a dish cloth.

Seal

Do not remove.

Hot soapy water:

Clean with a dish cloth. Do not scour.

Rails Hot soapy water:

Soak and clean with a dish cloth or brush.

Telescopic

shelves

Hot soapy water:

Clean with a dish cloth or a brush.

Do not remove the lubricant while the pull-

out rails are pulled out – it is best to clean

them when they are inserted. Do not soak

or clean in the dishwasher.

Accessories Hot soapy water:

Soak and clean with a dish cloth or brush.

Area Cleaning agents

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch HBC 33B550 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bosch HBC 33B550

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info