Bedienungsanleitung Bosch MUM 7400 (Seite 7 von 12) (Englisch)

70799

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Four rubber feet

Four rubber feet with formed suction cups

provide the ultimate in stability, while also

serving to isolate the power unit from the

hard surface to minimize noise and

vibration. Need clean smooth surface, see

figure 2h.

Getting Started

The operation of your Bosch Concept Series

Kitchen Machine is summarized below.

Specific instructions for using each of the

attachments, provided with Bosch Concept

7400 Kitchen Machine follow this summary.

Please read the specific instructions

thoroughly before using that attachment,

paying particular attention to the

IMPORTANT SAFEGUARDS and

WARNINGS provided.

1. Place power unit on suitable work

surface.

Before using the machine with any of

the attachments, the power unit should

be placed on a suitable work surface.

The surface should be sturdy, smooth

and clean; make sure that there is no

flour or oil on the surface. A clean

smooth surface will provide the best

footing for the suction cup feet on

the power unit and will limit slipping

and/or “walking.”

2. Plug power unit into power supply.

Unwind the power unit’s cord to

appropriate length and plug it into

a convenient nearby receptacle.

3. Remove motor drive cover.

Remove motor drive cover from mono-

drive.

4. Select the attachment to be used.

Select attachment you wish to use

and place on power unit. See specific

instructions for attachment selected.

Specific instructions are located on

pages listed below:

Attachment Pages

Mixing bowl w/dough hook ....... 9

–11

Mixing bowl w/twin whisks .......11–14

Blender ..................................... 15

–17

Table 1.

5. Operate unit

Once the attachment is in place, the

power unit may be operated. The

power may be manually turned on and

off using the rotary switch or operating

time may be controlled using the timer.

Using the timer

The operation of the power unit can

be set to turn off automatically after a

set time (maximum on time is 30

minutes). The length of time of

operation may be selected with the

appliance either already on and

running, or with rotary switch in Off,

“O/Off,” position; power unit must,

however, be plugged in.

To use timer function:

1. Turn on the timer function by

depressing the “time on” button,

see figure 2b. The display will show

minutes and seconds separated by

a colon. The initial display will be

“00:00” with the separating colon

flashing.

2. Select the operating time desired

by pressing the “+” button to

increase the time in 10-second

increments or the “-” button to

decrease the time in 10-second

increments.

Holding either button down for more

than 2 seconds will cause the time

to increase or decrease rapidly.

Also, if the running time desired is

close to 30 minutes, the timer can

quickly be set to 30 minutes by

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch MUM 7400 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info