Bedienungsanleitung Bosch MUM 7400 (Seite 9 von 12) (Englisch)

70799

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

8. Continue use.

If the attachment was of the batch-feed

type and you wish to continue using

the attachment, empty the bowl or jar

of the attachment per its specific

instructions and reinstall the

attachment as before. Restart the

power unit by turning the rotary switch

to the desired speed. If the timer

function was being used when the

power unit was stopped, turning the

rotary switch back on to the desired

speed will cause the power unit to

continue to operate for the remaining

time or until again interrupted. Repeat

as necessary to complete necessary

work.

9. Work completed,

remove attachment.

If the attachment is of the continuous

feed type or is the batch type and you

have completed the work you wished

to perform, turn the rotary switch to

the Off position, “O/Off ” and unplug; if

the timer function was being used,

depress the “time off” button (this will

turn off timer function and the digital

timer display) and then turn rotary

switch to the Off position, “O/Off,” and

unplug. With the power unit off and

unplugged, remove the attachment

from the power unit per the instructions

for the specific attachment being used.

10. Place contents (batch feed type).

If the attachment is the batch feed

type, disassemble per the specific

attachment’s instructions and place

the contents in a suitable container.

11. Care and cleaning.

Once you have completed working

with the Bosch Kitchen Machine, the

next step is to disassemble and clean

the attachments. If you wish to use

another attachment, please return to

step 4, above.

Power unit

With the power unit turned Off and

unplugged, it should be cleaned only with

a clean, damp cloth. Then wipe off the motor

drive cover and reinstall on the power unit.

Never use coarse or caustic cleaning

products to clean the power unit. Never

immerse the power unit in water.

The power unit may be left on the counter

or stored for future use. In either case,

always be sure to replace the motor drive

cover on the mono drive. This will prevent

dust and/or flour buildup in the drive.

The Bosch Concept 7400 Kitchen Machine

has been specially designed to enable it to

be stored in a drawer. Wind the cord around

the cord holder and, using the carry grips,

lift the power unit and place in your chosen

storage area.

Attachments

The attachment(s) that has been used

should be disassembled and washed, per

their specific instructions, dried and stored

for future use.

STANDARD ATTACHMENTS

Following are the specific instructions for

the standard attachments provided with the

Bosch Concept 7400 Kitchen Machine.

Stainless Steel Mixing Bowl (MUZ 7

ER1) with Twin Beating Whisks and

Dough Hook

WARNING

1. There is a risk of injury from rotating

tools when using the mixing bowl with

the dough hook or the twin beating

whisks.

2. Avoid contact with moving parts. Keep

hands, hair and clothing, as well as

spatulas, bowl scrapers and other

utensils away from dough hook and

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch MUM 7400 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info