Bedienungsanleitung Bosch PMF 10,8 LI (Seite 22 von 152) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

460547

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

22 | English

2 609 004 157 | (11.5.10) Bosch Power Tools

Mounting/Replacing the Application Tool/

Accessory

If required, remove an already mounted applica-

tion tool/accessory.

For removing the application tool/accessory

loosen the screw 10 with the allen key 11 and re-

move the tool.

Mount the application tool/accessory (e.g.

plunge cut saw blade 9) in such a way on the

tool holder 7 that the openings of the tool en-

gage into the cams of the tool holder.

For a safe and fatigue-free working position it is

possible to position the application tools/acces-

sories in any snap-in positions on the tool hold-

er. Position the tool in such a way that the de-

pressed centre points downwards (marking on

the tool is readable from above, see figure on

the graphics page).

Use the screw 10 to fasten the application

tool/accessory. Tightly fasten the screw 10 with

the allen key 11.

f Check the tight seating of the application

tool/accessory. Incorrect or not securely fas-

tened application tools/accessories can come

loose during operation and pose a hazard.

Mounting/Replacing a Sanding Sheet on the

Sanding Plate

The sanding plate 12 is fitted with Velcro back-

ing for quick and easy fastening of sanding

sheets with Velcro adhesion.

Before attaching the sanding sheet 13, free the

Velcro backing of the sanding plate 12 from any

debris by tapping against it in order to enable

optimum adhesion.

Position the sanding sheet 13 flush alongside

one edge of the sanding plate 12, then lay the

sanding sheet onto the sanding plate and press

firmly.

To ensure optimum dust extraction, pay atten-

tion that the punched holes in the sanding sheet

match with the holes in the sanding plate.

To remove the sanding sheet 13, grasp it at one of

the tips and pull it off from the sanding plate 12.

You can use all sanding sheets, fleece pads/

polishing cloth pads of the Delta 93 mm series

of Bosch accessory program.

Sanding accessories, such as fleece pads/pol-

ishing cloth pads, are attached to the sanding

plate in the same manner.

HCS plunge

cut saw

blades, wood

Wooden materials,

soft plastics

Smaller separating and plunge cuts;

Example: Cut-outs in furniture for cable con-

nections

BIM plunge

cut saw

blades, metal

Metal (e.g. unhard-

ened nails, screws,

smaller profiles),

non-ferrous metals

Smaller separating and plunge cuts;

Example: Shortening narrow profiles, cutting

fastening elements such as staples

HM-Riff seg-

ment saw

blade

Grouting joints, soft

wall tiles, glass-fibre

reinforces plastic

and other abrasive

materials

Cutting and separating close to edges, in cor-

ners or hard to reach areas;

Example: Removing grouting joints between

wall tiles for repair work, cutting openings in

tiles, gypsum boards or plastic

HM-Riff delta

plate

Mortar, concrete

remainders, wood,

abrasive materials

Rasping and sanding on hard surfaces;

Example: Removing mortar or tile adhesive

(e.g. when replacing damaged tiles)

Scraper, rigid Carpets, coverings Scraping on hard surfaces;

Example: Removing carpet and tile adhesive

Accessory Material Application

OBJ_BUCH-1170-002.book Page 22 Tuesday, May 11, 2010 3:36 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch PMF 10,8 LI Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info