Bedienungsanleitung Bosch UniversalSaw 18V 70 (Seite 16 von 249) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

777032

Zoom out

Zoom in

Vorherige Seite

1/249

Nächste Seite

16 | English

contacting a "live" wire may make exposed metal parts of

the power tool "live" and could give the operator an elec-

tric shock.

uUse clamps or another practical way to secure and

support the workpiece to a stable platform. Holding

the workpiece by hand or against your body leaves it un-

stable and may lead to loss of control.

uKeep hands away from the sawing area. Do not reach

under the workpiece. Contact with the saw blade can

lead to injuries.

uOnly bring the power tool into contact with the work-

piece when switched on. Otherwise there is danger of

kickback if the cutting tool jams in the workpiece.

uEnsure that the footplate always rests securely while

sawing. A jammed saw blade can break or lead to kick-

back.

uWhen the cut is completed, switch off the power tool

and then pull the saw blade out of the cut only after it

has come to a standstill. In this manner you can avoid

kickback and can place down the power tool securely.

uAlways wait until the power tool has come to a com-

plete stop before placing it down. The application tool

can jam and cause you to lose control of the power tool.

uUse only undamaged saw blades that are in perfect

condition. Bent or dull saw blades can break, negatively

influence the cut, or lead to kickback.

uDo not brake the saw blade to a stop by applying side

pressure after switching off. The saw blade can be dam-

aged, break or cause kickback.

uOnly use the power tool with the base plate. If you do

not use the base plate, you are at risk of not being able to

control the power tool.

uUse suitable detectors to determine if there are hid-

den supply lines or contact the local utility company

for assistance. Contact with electric cables can cause

fire and electric shock. Damaging gas lines can lead to ex-

plosion. Breaking water pipes causes property damage.

uIn case of damage and improper use of the battery, va-

pours may be emitted. The battery can set alight or ex-

plode. Ensure the area is well ventilated and seek medical

attention should you experience any adverse effects. The

vapours may irritate the respiratory system.

uDo not open the battery. There is a risk of short-circuit-

ing.

uThe battery can be damaged by pointed objects such

as nails or screwdrivers or by force applied externally.

An internal short circuit may occur, causing the battery to

burn, smoke, explode or overheat.

uOnly use the battery with products from the manufac-

turer. This is the only way in which you can protect the

battery against dangerous overload.

Protect the battery against heat, e.g. against

continuous intense sunlight, fire, dirt, water

and moisture. There is a risk of explosion and

short-circuiting.

Product Description and

Specifications

Read all the safety and general instructions.

Failure to observe the safety and general in-

structions may result in electric shock, fire

and/or serious injury.

Please observe the illustrations at the beginning of this oper-

ating manual.

Intended Use

The power tool is intended for making separating cuts and

cut-outs in wood, plastic, metal, ceramic plates and rubber

while resting firmly on the workpiece. It is suitable for

straight and curved cuts with mitre/bevel angles of up to

45°. Note the saw blade recommendations.

Product features

The numbering of the product features refers to the diagram

of the power tool on the graphics page.

(1) Lock-off function for on/off switch

(2) On/off switch

(3) Battery charge indicator

(4) Batterya)

(5) Battery release buttona)

(6) Extraction outlet

(7) Base plate

(8) Hood for extraction attachmenta)

(9) Base for CutControla)

(10) Saw bladea)

(11) Viewing window for CutControla)

(12) Guide roller

(13) Shock protection guard

(14) Saw blade receptacle

(15) Handle (insulated gripping surface)

(16) Saw blade storage compartmenta)

(17) Glide shoea)

(18) Anti-splinter guarda)

(19) Guide for parallel guide

(20) Dust extraction adaptera)

(21) Dust extraction hosea)

(22) Scale for mitre/bevel angles

(23) Base plate screw

(24) 0° cut mark CutControla)

(25) 45° cut mark CutControla)

(26) Locking screw for parallel guidea)

(27) Parallel guide with circle cuttera)

(28) Circle cutter centring tipa)

a) Accessories shown or described are not included with the

product as standard. You can find the complete selection of

accessories in our accessories range.

1 609 92A 64Y | (12.07.2021) Bosch Power Tools

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch UniversalSaw 18V 70 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info