Bedienungsanleitung Bosch UniversalSaw 18V 70 (Seite 17 von 249) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

777032

Zoom out

Zoom in

Vorherige Seite

1/249

Nächste Seite

English | 17

Technical data

Jigsaw EasySaw 18V-70

Article number 3603K120..

Stroke rate control ●

Rated voltage V= 18

No-load stroke rate n₀ min−1 2600

Stroke mm 20

Max. cutting depth

– in wood mm 70

– in aluminium mm 15

– in steel (unalloyed) mm 6

Max. cutting angle (left/right) ° 45

Weight according to EPTA-Pro-

cedure01:2014A) kg 1.7 (1.5Ah)–

2.0 (6Ah)

Recommended ambient temper-

ature during charging °C 0to+35

Permitted ambient temperature

during operationB) and during

storage

°C –20to+50

Recommended rechargeable bat-

teries PBA 18V…W-.

Recommended battery char-

gersC) AL 18…

A) Depends on battery in use

B) Limited performance at temperatures <0°C

C) The following chargers are not compatible with the PBA re-

chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV

Noise/Vibration Information

Noise emission values determined according to

EN62841‑2‑11.

Typically, the A-weighted noise level of the power tool is:

Sound pressure level 82dB(A); sound power level

93dB(A). Uncertainty K=5dB.

Wear hearing protection!

Vibration total values ah (triax vector sum) and uncertainty K

determined according to EN62841‑2‑11:

Cutting boards with saw bladeT144D:

ah,B = 8.5m/s2, K = 2.5m/s2,

cutting sheet metal with saw blade T118A:

ah,M = 10m/s2, K = 2m/s2.

The vibration level and noise emission value given in these

instructions have been measured in accordance with a

standardised measuring procedure and may be used to com-

pare power tools. They may also be used for a preliminary

estimation of vibration and noise emissions.

The stated vibration level and noise emission value repres-

ent the main applications of the power tool. However, if the

power tool is used for other applications, with different ap-

plication tools or is poorly maintained, the vibration level

and noise emission value may differ. This may significantly

increase the vibration and noise emissions over the total

working period.

To estimate vibration and noise emissions accurately, the

times when the tool is switched off or when it is running but

not actually being used should also be taken into account.

This may significantly reduce vibration and noise emissions

over the total working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping their hands warm,

and organising workflows correctly.

Assembly

uRemove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

Battery Charging

uUse only the chargers listed in the technical data. Only

these chargers are matched to the lithium-ion battery of

your power tool.

Note: The battery is supplied partially charged. To ensure

full battery capacity, fully charge the battery in the charger

before using your power tool for the first time.

The lithium-ion battery can be charged at any time without

reducing its service life. Interrupting the charging process

does not damage the battery.

The lithium-ion battery is protected against deep discharge

by the "Electronic Cell Protection (ECP)". When the battery

is discharged, the power tool is switched off by means of a

protective circuit: The application tool no longer rotates.

uDo not continue to press the On/Off switch after the

power tool has automatically switched off. The battery

can be damaged.

To remove the battery (4), press the release button (5) and

pull the battery upwards and out of the power tool. Do not

use force to do this.

Battery charge indicator

The battery charge indicator (3) indicates the charge condi-

tion of the battery when the power tool is switched on. It

consists of three green LEDs.

LEDs Capacity

3 × continuous green light 66–100%

2 × continuous green light 33–66%

1 × continuous green light 11–33%

1 × slowly flashing green light 0–10%

The three LEDs in the battery charge indicator (3) flash

quickly when the temperature of the battery is outside the

operating temperature range of −20 to +50°C and/or the

overload protection has been triggered.

Bosch Power Tools 1 609 92A 64Y | (12.07.2021)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bosch UniversalSaw 18V 70 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info