718469
148
Zoom out
Zoom in
Vorherige Seite
1/166
Nächste Seite
Troubleshooting
140
14
The printed page contains incorrect
characters
Make sure you have defined the correct character set (font) in the application.
Try changing the font used in the document.
This printer is not detected when
establishing a Bluetooth connection
(PJ-762/PJ-763/PJ-763MFi only)
1 Check that the
(Bluetooth) indicator is lit in blue.
If the
(Bluetooth) indicator is flashing or turned off, the Bluetooth
connection is not established. To establish a Bluetooth connection, refer to
Connecting Using Bluetooth (PJ-762/PJ-763/PJ-763MFi Only) on page 26.
2 Check the Bluetooth settings.
To print the printer settings, see Confirm the Printer Settings on page 91.
Specify the correct Bluetooth settings in the Printer Setting Tool (see
Changing the Printer Settings on page 45).
This printer is not detected when
establishing a Wi-Fi connection
(PJ-773 only)
1 Check that the
(Wi-Fi) indicator is lit in blue.
If the
(Wi-Fi) indicator is flashing or turned off, the Wi-Fi connection is not
established. To establish a Wi-Fi connection, refer to Connecting Using
Wi-Fi (PJ-773 Only) on page 27.
2 Check the Wi-Fi settings.
To print the printer settings, see Confirm the Printer Settings on page 91.
Consult with the network administrator and specify the correct Wi-Fi settings
in the Printer Setting Tool (see Changing the Printer Settings on page 45).
The Wi-Fi connection is taking too
long to connect (PJ-773 only)
From initialization to completing the connection takes time, so it may take a
minute or more to establish the Wi-Fi connection. Since this differs depending
on the device and environment, check with the device manufacturer.
I want to reset the printer/delete the
data transferred from a computer or
mobile device.
To reset the printer, perform the following procedure:
1 Confirm that the printer is turned off.
2 While holding down the (Feed) button, press the (Power) button three
times, and then release the (Feed) button.
The POWER indicator starts flashing in orange.
3 Press the (Feed) button three times to reset the printer's communication
and device settings to their factory settings and delete all the data
transferred to the printer.
Problem Solution
148

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother PJ-773 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother PJ-773

Brother PJ-773 Bedienungsanleitung - Deutsch - 168 seiten

Brother PJ-773 Bedienungsanleitung - Holländisch - 167 seiten

Brother PJ-773 Bedienungsanleitung - Französisch - 167 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info