718469
150
Zoom out
Zoom in
Vorherige Seite
1/166
Nächste Seite
Troubleshooting
142
14
Pages Are Partially Printed 14
Network Setup Problems 14
Problem Solution
The DATA indicator turns off while a
page remains in the printer
The computer or mobile device may not have sent a full page of data. Try
printing the document again.
The computer or mobile device may have sent the wrong page size
information, or the size of the loaded paper is wrong. Check the paper size
settings in the application, the Printer Setting Tool, and printer driver to
make sure the specified paper size matches the paper that is loaded.
Make sure the [Form Feed Mode] setting in the Printer Setting Tool or
printer driver is not set to [No Feed].
Try pressing the
(Feed) button to feed the paper manually.
The printer ejects a partially printed
page, and the DATA indicator
remains lit or flashing in green
Use the correct paper size setting.
Problem Solution
You are using security software Confirm your settings in the installation dialog box.
Allow access when the security software alert message appears during the
printer installation.
Your security settings
(SSID/Network Key) are incorrect
Recheck and choose the correct security settings.
The manufacturer's name or model number of the Wi-Fi access point/router
may be used as the default security settings.
See the instructions supplied with your Wi-Fi access point/router for
information on how to find the security settings.
Ask the manufacturer of your Wi-Fi access point/router or ask your Internet
provider or network administrator.
Your printer is placed too far from
your mobile device
Move your printer within about 3.3 feet (1 meter) of the mobile device when you
configure the Wi-Fi network settings.
There are obstructions (walls or
furniture, for example) between your
printer and the mobile device
Move your printer to an obstruction-free area.
A wireless computer, Bluetooth
supported device, microwave oven
or digital cordless phone is near the
printer or the Wi-Fi access
point/router
Move other devices away from the printer.
You are using MAC Address filtering You can confirm the MAC address by printing the printer settings report.
See Confirm the Printer Settings on page 91 for more information.
150

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother PJ-773 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother PJ-773

Brother PJ-773 Bedienungsanleitung - Deutsch - 168 seiten

Brother PJ-773 Bedienungsanleitung - Holländisch - 167 seiten

Brother PJ-773 Bedienungsanleitung - Französisch - 167 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info