718469
149
Zoom out
Zoom in
Vorherige Seite
1/166
Nächste Seite
Troubleshooting
141
14
Pages Do Not Print 14
Problem Solution
The DATA indicator remains lit in
green but the printer does not print
Printing of all received data is not completed. Wait until it is finished.
If paper is not loaded, load the paper.
If the printer does not print even though paper is loaded, remove the paper,
and then load it again.
Try printing again after turning the printer off, and then on again.
Note
If the printer is connected via Wi-Fi (PJ-773 only), the connection is lost
when the printer is turned off. When the printer is turned on again, it will take
up to 15 seconds for Wi-Fi to become functional.
There may be problems with sending simple ASCII text data to the printer.
If the CR/LF command is not at the end of lines or the form feed command
is not at the end of the last line, the printer may be waiting for this data to be
sent. Print another page, or press the
(Feed) button to feed the paper.
The printer may have been started up in mass storage mode (see Mass
Storage Mode on page 92). Turn the printer off, and then turn it on again.
The application should be sending
data to the printer, but the DATA
indicator does not light in green
With a USB connection:
1 Connect the USB cable firmly and correctly.
2 Try using another USB cable.
With a Bluetooth connection (PJ-762/PJ-763/PJ-763MFi only):
1 Check that the
(Bluetooth) indicator is lit in blue.
If the
(Bluetooth) indicator is flashing or turned off, the Bluetooth
connection is not established. To establish a Bluetooth connection, refer
to Connecting Using Bluetooth (PJ-762/PJ-763/PJ-763MFi Only)
on page 26.
2 Specify the correct Bluetooth settings in the Printer Setting Tool (see
Changing the Printer Settings on page 45).
With a Wi-Fi connection (PJ-773 only):
1 Check that the
(Wi-Fi) indicator is lit in blue.
If the
(Wi-Fi) indicator is flashing or turned off, the Wi-Fi connection is
not established. To establish a Wi-Fi connection, refer to Connecting
Using Wi-Fi (PJ-773 Only) on page 27.
2 Specify the correct Wi-Fi settings in the Printer Setting Tool (see
Changing the Printer Settings on page 45).
149

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Brother PJ-773 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Brother PJ-773

Brother PJ-773 Bedienungsanleitung - Deutsch - 168 seiten

Brother PJ-773 Bedienungsanleitung - Holländisch - 167 seiten

Brother PJ-773 Bedienungsanleitung - Französisch - 167 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info