Bedienungsanleitung Bushnell Onix 350 (Seite 14 von 28) (Englisch)

481954

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

EXPLORING THE PAGES : SET

• GPS-press the right button and select GPS satellite reception “ON” to for normal

GPS operation, select “OFF” to conserve battery life if you are not going to be

navigating, or while you are getting more familiar with your ONIX indoors where

GPS reception is not possible. Two other options are available:

WAAS (Wide Area Augmentation System)- turning WAAS on will provide

slightly better GPS accuracy in the United States. As this can decrease battery

life, you may want to keep it turned oﬀ for most normal navigation activities.

Cold Start Receiver-press OK to re-activate GPS satellite reception. is will

force the ONIX to clear the satellite “almanac” information, which is stored

automatically during the ﬁrst power-on to speed up the process of choosing the

best GPS satellites for your usual starting area. If this almanac data is no longer

valid, it will cause longer startup times. Enabling a cold start is recommended

if you have re-located to a new area that is over 300 miles away from your last

power-on position. Note that this will only take eﬀect the next time the unit is

powered on-there is no advantage or reason to force a cold start if the unit has

already locked onto satellites in a reasonable amount of time, and are still within

about a 300-mile radius of the location where you ﬁrst powered up the ONIX.

• Compass-options to select your preferred navigation units (Degrees, Cardinal

Letter, or Mils) and North Reference (True or Magnetic).

• Display-allows adjustment of display Brightness and Breadcrumbs Color.

• Sounds-options to mute all sounds, set volume, and mute or select diﬀerent tones

for: key beep, destination arrival and warning sound.

•Time-sets time format: 24 hr or AM/PM, North American time zone, UTC

(Universal Time) Oset (for other time zones), daylight savings (on/o/auto).

•Units-selecting distance/speed units, elevation units, GPS position format,

pressure, temperature, and datum (default for North America is WGS84-see the

glossary for more info.)

•Language- selects language used for all display menus and option screens.

•Owner Info- allows you to input personal information for identiﬁcation (this

can be shown during startup if desired). Please refer to the “Using the Text Tool”

section on page 19 for details on how to enter letters and numerals.

•Reset Data-(Fig. 14) allows you to reset (clear) all existing data, or speed, distance,

time, or breadcrumb data individually or in any combination. Press OK to select

any item or items, then go down to “Reset Selected” and press OK to reset it/them.

After resetting, the “checkmark” next to the item(s) will disappear, and a “Reset

Complete” message is shown. A common use of reset is to clear old “breadcrumb”

trail marks from a past trip to the same area.

• Unit Info-provides hardware/software version numbers, serial number, etc.

Fig 12. SET Page

Options List

Fig 13. SET Page

User Proles

Fig 14. SET Page

Reset Data

Options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bushnell Onix 350 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info