Bedienungsanleitung Bushnell Onix 350 (Seite 16 von 28) (Englisch)

481954

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

EXPLORING THE PAGES : ALMANAC / ELEVATION

• Press the HOT button to open a ToolBox with three options (Fig. 18):

Fishing Chart-highlight this and press OK (a checkmark will appear) if you

want the animal activity level chart to be relevant for ﬁsh.

Hunting Chart-select and check this if you prefer the activity graph to indicated

mammal activity levels.

Set Timezone-select this and press OK to temporarily jump to the “Time”

options on the SET page (24 hr or AM/PM format, daylight savings, etc).

• To change the date (for example, if you want to see the solunar data and predicted

activity level for a day in the future), press the DOWN key to select the date box.

Now you can press the LEFT or RIGHT keys to go back or move ahead to a

diﬀerent date. Or, press OK to get a popup one month calender, then use the 4-

way keypad to select a date and press OK. Pressing the “-” or “+” buttons when

the calender is displayed will change it to a past or future month.

• Press the DOWN key to select the “time period” box just above the graph,

then press either the OK button or RIGHT key to toggle between displaying an

animal/sh activity chart for One Day (Fig. 19) (just the currently displayed date

in the box above the time period) or for a One Month period of time. Note: e

green area that will appear shows the correction to the activity graph based on SoLunar

Edge Technology. is technology incorporates local pressure and temperature variations

that aﬀect animal/ﬁsh behavior during that part of the day. A red line indicates the

selected day (One Month mode) or current time (One Day mode).

* For more information on patented Solunar Edge technology and Speedtech

Instruments products, visit www.Speedtech.com

e ELEVATION Page

e Elevation page uses data from the internal altimeter to display elevation

related information, including your current location’s elevation, the maximum

elevation reached on your trail, and the ascended total distance in feet or meters

(Fig. 20). You can view the elevation history for any of your previously stored

trails or the current one you’re on. A graph at the bottom of the screen shows how

your elevation has changed over time (up to 24 hours), or over distance traveled

on a trail. “A” and “B” markers may be placed on the graph to easily compare the

elevation diﬀerences between two points of distance or time on the trail. ese

markers are independent and each can be shown on the graph or not, removed, or

“Set to Now” to indicate your current position. Select the Elevation page on your

ONIX350 and explore the features and options:

Fig 21. Elevation:

Trip List

Fig 19. Almanac

Chart: Time

Period=1 Day

Fig 18. Almanac

Chart: HOT Button

Fig 20. Elevation

Page

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bushnell Onix 350 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info