Bedienungsanleitung Bushnell Onix 350 (Seite 18 von 28) (Englisch)

481954

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Setting Waypoints

e simplest GPS function is to mark your present location, so you can ﬁnd it again

later. Any location that you choose to mark is called a “waypoint”. To set a waypoint

at your current position, just press “OK” (center of the 5-way button). You will see

the Waypoint Menu (Fig. 26), with a numbered default name assigned to the new

waypoint (WPT000, WPT001, etc) shown at the top, with these options below

it: Edit Name, Edit Icon, Activate Alert, Set Waypoint. Since “Set Waypoint” is

already highlighted, simply press OK again to accept “WPT###” as the name and

create a waypoint at your current position. Or, scroll up to edit the new waypoint’s

name and/or icon before setting it-this might make it easier to nd later (see “How

to Create/Edit Names..” and “How to Set/Edit Icons” for details). After editing the

name and/or icon, go down to “Set Waypoint” and press OK-you’ll then see the

new waypoint on the map with the name and icon you gave it. If you decide not to

set the waypoint, simply press EXIT or the LEFT key.

To set an alert beep to signal anytime in the future when you return to the waypoint,

select “Activate Alert” and press OK to set the alert (repeat to De-Activate previously

set Alerts).

Of course, you can always rename a previously set waypoint, change its icon, or

delete it entirely at any time in the future. Press the HOT button, then “+” to view

the “My Stuﬀ” menu. Select “My Waypoints”, press OK, then select the previously

set waypoint you want to work with from the list. Press OK, and you will see the

Waypoint Options menu (Fig. 27). Along with the same options you saw when you

originally created the waypoint (Edit Name, Edit Icon (Fig. 28), Activate Alert),

you can navigate to the waypoint, or delete the waypoint completely (there is a

conﬁrmation step to prevent accidentally deleting an important waypoint).

Creating a Map Area (My Map Areas)

A special feature available on the MAP page lets the user deﬁne a polygonal (triangle,

square, etc) area of any size, placed anywhere, which can then be used to simply

measure that area (show the total sq.mi. or sq.ft.), help deﬁne map and property

boundaries, and/or generate an alert message when the area is either entered or

exited. is is done by placing a minimum of three virtual “fence posts” on the map

which are used to deﬁne the limits of the area (Fig. 29). e process for setting up a

custom Map Area is outlined on the next page. More information about utilizing

the “My Map Areas” features can be found at: http://www.bushnell.com/gps/

by clicking the Product Support link.

Let’s take a look at the basics of setting up and using your Map Areas...

USING YOUR ONIX350 GPS RECEIVER : Setting Waypoints / Map Areas

Fig 26.

Waypoint

Menu-Press OK to set

new waypoint

Fig 27.

Options for

previous waypoints:

Navigate To, Edit

or Delete

Fig 28.

Waypoint

“Edit Icon”

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bushnell Onix 350 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info