Bedienungsanleitung Bushnell Onix 350 (Seite 19 von 28) (Englisch)

481954

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

How to Dene a New Map Area (Using “Fence Posts”):

• Click the HOT button to get the HOT menu, then press “+” to switch to the

“My Stuﬀ” menu.

• Highlight “My Map Areas” and press OK-you will see “Create New Map Area”,

already selected. Press OK.

• A default name for the new Map Area is assigned (MPA001), and you’ll see 3

options: Add Fence Post, Edit Name, and Delete. You can edit the name of the

Map Area now, or change it later. Select “Add Fence Post” and press OK. e

default name for your ﬁrst Fence Post is “FP001”, this can be changed later if

you like.

• Use the 4-way keypad to move the Fence Post if you need to ne tune its

location (zoom in ﬁrst with the “+” key if necessary.

• Once you have the rst Fence Post where you want it, press OK to conrm and

set it. Its name will then be displayed under the Map Area heading (MPA001).

Press OK or the RIGHT key to see these options

(Fig. 30)

Insert After-press OK to place the next Fence Post where the ﬁrst is (you can

then move it elsewhere with the 4-way keypad), or press the RIGHT key to

see options for placing the next Fence Post based on a waypoint, POI, your

current location, etc.

Move-change the position of this Fence Post

Edit Name-change the name for this Fence Post

Set as Post #1-after selecting a previously placed Fence Post, select this

option and press OK to use the same Fence Post as the starting point of a new

(adjacent) Map Area.

Delete-erase the Fence Post

• Keep using “Insert After” to add Fence Posts until you have placed at least three

or four to deﬁne the boundaries of the Map Area you are creating. Press EXIT or

the LEFT key to see the Map Areas List, with your new Map Area added. With

the name of the Map Area selected, press the RIGHT key to view the Area on the

base map, with lines visible between the Fence Posts. e Info Box at the bottom

of the display will automatically show the total area (in square miles) of the Map

Area. If your Map Area is very small, the Info Box changes to square feet instead

of miles. If you need to know the area in acres, 1 sq. mi.=640 acres, so simply

multiply the number in the info box by 640. For small areas, divide the square

feet by 43560 to see the total area in acres.

• Press EXIT to return to the Map Areas list. Press OK to see the list of options

for the Map Area

(Fig. 31)

Stay Within-when this is checked, a “Map Area Breached!” warning will ﬂash

onscreen if you leave the Map Area boundary.

Avoid Area-check this to generate the “Map Area Breached!” warning if you

enter the Map Area (for example, to prevent accidentally trespassing on private

property).

Navigate To-go towards the closest point in the area relative to your current

position

USING YOUR ONIX350 GPS RECEIVER : Map Areas/Fence Posts

Fig 29. Completed

Map Area-built with

4 fence posts

Sq. Miles

Fig 31. Map Area

Options List

Fig 30. Map Area

Fence Post Options

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bushnell Onix 350 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info