Bedienungsanleitung Caliber RCD234DBT (Seite 12 von 18) (Englisch)

699168

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

Owner’ Manual

Basic Operation

1. Tuning the unit On / Off

Press PWR Button to turn the unit

on, the display will show a message

WELCOME to indicate it is ready for

use. Press and hold the PWR button

to turn the unit off. The display will

show a message “GOODBYE”.

2. Mode Selection

Press the MOD Button to select Ra-

dio Mode. Press the MODE Button

to cycle the Play Mode amoung AUX,

RADIO and CD PLAY.

Note: USB & SD mode will only show

on the display when a USB flash

memory or SD card is inserted into

the USB port or SD portt.

3. Loudness Control

Press the SEL button until “LOUD

OFF” is shown on the display indi-

cates that the loudness function is

OFF. Turn the volume knob to select

between ON or OFF.

4. Mute Control

Press the POW/MUT button active or

cancel Mute function.

5. Volume

Use the VOL +/- Button to adjust the

volume level. The larger the number,

the higher the volume level.

6. Treble

Press SEL Button repeatedly until the

display shows "TRE 00". Use the VOL

+/- Button to adjust. When EQ is ON,

treble control is not available.

7. Balance

Press SEL Button repeatedly until the

display shows "BAL L-R", then use the

VOL +/- Button to adjust the balance

between the left & right speakers.

8. Fader

Press SEL Button repeatedly until the

display shows "FAD F-R", then use

the VOL +/- Button to adjust the bal-

ance between the front & rear speak-

ers.

9. Clock

The time clock can be set anytime

when the power is on. Press the PTY/

CLK Button on the faceplate or re-

mote control once, the time will show

on the display.

Then press and hold the button until

the hour blinks on the display. Rotate

the VOL knob to set hours, then press

the VOL knob for the minutes to blink

and rotate the VOL knob to set.

Press the PTY/CLK button again or

leave the unit idle for new setting to

effect. Press the PTY/CLK button

anytime to view the time clock display.

10. Preset Beep Sound Off

Press the SEL button repeatedly un-

til “BEEP ON” is displayed. Turn the

VOL +/- Button to select "BEEP OFF"

or "BEEP ON", then leave the unit idle

for setting to take effect.

11. Preset Equalizer Function

Press the SEL Button repeatedly un-

til “EQ” indication is displayed then

rotate the Volume knob to choose

between the EQ sound effects. The

Sequence of equalizer setting will be

as follows:

FLAT

OFF

POP ROCK

CLASSIC

Owner’s Manual

1. Pairing

The bluetooth of this radio is always in

standby mode for pairing and connec-

tion, signalled by a blinking bluetooth

icon on the LCD Display.

At this blinking time, please run the

bluetooth search and connect func-

tion in your cellphone. The car radio

model no “BT car stereo” will be

shown on the cellphone. Select this

car radio and connect to finish the

pairing. The bluetooth icon on the

display will be on indicating that the

connection is established. Bluetooth

function is ready to use.

* Pairing password is required in

some phones. Insert “0000” in such

case.

2. Calling

In any play mode, dial the desired

number on your cellphone. The unit

will switch to bluetooth handsfree

mode automatically. “CALL OUT” will

be shown on the display indicating the

dialling is in progress.

3. Accepting Calls

When there is incoming call, “CALL

IN” will be shown on the display indi-

cating there is phone call to answer.

“BT TALK” will be shown after the

“ANSWER” button is pressed. Rotate

the volume knob during ringing or

conversation to adjust the respective

volume level.

4. Rejecting Calls

During ringing or conversation, press

the “REJECT” button to end the call or

reject the call. the unit will resume to

the original play mode.

5. BT Audio (A2DP)

Press MOD/ button until the unit

entered BT AUDIO. BT audio will play

automatically when you play the song

in the cellphone. You could pause by

“ ” button, to choose previous or next

song by pressing |<< and >>| button.

6. Disconnecting

Disconnect the paired phone by op-

erating on the cellphone. You cannot

process disconnection on the car ra-

dio headunit.

Bluetooth Operation (Optional)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Caliber RCD234DBT Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info