Bedienungsanleitung Cambridge 751RV2 (Seite 33 von 40) (Englisch)

581025

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

751R V2azur

ENGLISH

Using Zone 2 with the built in SBL/SBR amplier outputs

If you are using only the 5 main outputs in the main Zone (or less) you can

reassign the SBL/SBR amplier channels to Zone 2.

In the On-Screen Display select the Speaker Setup menu.

azur 751R Main Menu

Speaker Setup

HDMI/Component Assign

Video Input Select

Scaler Assign

Video Processing Settings

Audio Input Select

Tone/Sub/LFE Config.

Rec.2/Zone2 Output Select

Advanced Setup

Quit I/O

Then select the Speaker Conguration menu.

Speaker Setup Menu

Speaker Configuration

Speaker Level Calibration

Speaker Distance

Speaker Crossover

Audyssey Autosetup

Audyssey Autosetup & 2EQ

Return I/O

Now select the Decode Mode item and select 5.1.

Speaker Config Menu

Decode Mode :

Front L/R :

Center :

Surr. L/R :

Subwoofer :

SBL/R Assign :

[FL R must be Large

when Sub Off]

Return I/O

5.1

Large

Yes

Zone 2

A menu item should be displayed called SBL/R Assign.

When they are not being used in the main room (for a 7.1 speaker setup) this

function allows the SBL/R channels to be re-assign to bi-amping the front

channels (Bi-amp see later section) or Zone 2 or simply not used (None).

Select Zone 2 use and go back out of the menu structure.

Now connect a suitable pair of loudspeakers (4-8 ohms) for Zone 2 as shown

below to the SBL and SBR outputs.

Note: Be careful no small 'hairs' or strands of wire are able to short the

loudspeaker terminals together or short them to the back panel.

Optionally a Subwoofer can also be used in Zone 2, simply connect a

suitably long RCA/Phono – RCA/Phono lead from the Zone 2 Sub out to the

subwoofer in Zone 2.

Zone 2

Optional

subwoofer

Using the 751R V2 with an IR repeater

system

If desired the 751R V2 can be mounted in a suitably well ventilated cabinet

and an IR repeater system used to control the unit remotely.

Both an IR Emitter input (suitable for IR repeater systems with modulated IR

emitter outputs) and an IR Receiver input (suitable for IR repeater systems

with un-modulated TTL level outputs) for the Main Zone are featured.

A Front IR On/Off switch on the rear panel allows the disabling of the front

panel IR receiver if desired.

Control Bus In/Out also allow some Cambridge Audio products which feature

App. control such as the StreamMagic 6 Network Player to control the basic

functions of the 751R V2 remotely.

Contact your dealer for details.

Zone 2 setup and use

The 751R V2 features a set of Zone 2 outputs which can independently

access stereo audio/video sources connected to the unit via a range of

analogue connections.

Digital inputs (S/PDIF/Co-ax, Toslink/Opto or HDMI) cannot be directly

selected by Zone 2.

However for any source simply by making a parallel analogue connection for

audio or video to the 751R V2 alongside any digital connections allows that

source to now be used in Zone 2 also.

Sources directly selectable in Zone 2 are BD/DVD, Video 1, Video 2, Rec 1,

Aux, CD, Rec 2, Vid 3/MP3 plus the Expansion input and the built-in Tuner.

There is also a Follow Main function. This sends a 2 channel down-mix (L+C,

R+C) of the source currently selected in the Main Zone to Zone 2.

This is useful if you want to listen to a digitally connected or surround source

in Zone 2 which cannot be directly selected in Zone 2.

You can choose to watch the same source as the main room or a different

source, Zone 2 can also be On or Off (in standby) whether or not the main

room output is On or Off (in standby).

The audio output can be either by using the Surround Back Left and Right

channels if they are not being used in the main room (if the main room is

congured as 5.1 or less) or by using the Zone 2 preamp outputs and an

external power amp. The Zone 2 video output can be via Composite (CVBS),

S-Video or Component (YUV/YCbCr/YPbPr).

Note: The 751R V2 does not transcode between analogue video types for

Zone 2, the three types are switched in parallel.

Thus it is usually better to decide on one analogue video connection type

to the 751R V2 for Zone 2 use, failing this you can connect more than one

Zone 2 video output to the Zone 2 TV and switch the TV to the appropriate

input type for that source.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge 751RV2 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge 751RV2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info