Bedienungsanleitung Cambridge 751RV2 (Seite 34 von 40) (Englisch)

581025

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

With this conguration you can now control Zone 2 from the main room by

using the main or Zone 2 handsets as supplied (see later section).

If it is desired to remotely control Zone 2 and the sources in it from Zone 2

itself an additional (not supplied) IR repeater system should be used, choose

one with an Emitter (modulated) type output suitable to connect to the Zone

2 IR emitter In (contact your dealer for details).

Zone 2

CD Player

Satellite Receiver

Remote

IR Receiver

Repeater

In this conguration an Infra-Red repeater system receives commands in

Zone 2 and relays them back to the 751R V2 via the Zone 2 IR Emitter In.

Now you can control Zone 2 from within that Zone using either the Zone

2 or main handsets. In addition if IR Emitters outputs are connected from

the Zone 2 IR Emitter Outputs on the 751R V2 to the source components

(usually placed over the source units IR sensors) then commands from

remotes in Zone 2 can be relayed back to the source components.

The sources own handsets plus the Zone 2 or main handsets can be used in

Zone 2 or a learning type remote can be used to combine all the functions

together.

Using Zone 2 with an external stereo power amp.

The 751R V2 Zone 2 outputs include a permanently available preamp

output. This can be used to connect a separate power amp in Zone 2 if for

instance the SBL/SBR amplier channels are being used in the main zone.

Zone 2

Optional

subwoofer

Optionally a Subwoofer can also be used in Zone 2 as shown, simply connect

a suitably long RCA/Phono – RCA/Phono lead from the Zone 2 Sub out to

the subwoofer in Zone 2.

The Zone 2 preamp output is unaffected by the assignment of the SBL/R

channels and is always available.

If a power amp is used for Zone 2 the SBL/SBR amplier channels can then

be used for 7.1 (Set decode mode to 7.1) or Height channels (set decode

mode to 5.1+H) or to bi-amp the front channels (Set decode mode to 5.1 and

Set SBL/R assign to Bi-amp) or simply leave them unconnected (Set decode

mode to 5.1 and Set SBL/R assign to None).

If the remote Zone 2 power amp features a trigger input to turn it on and off

it is possible to use one of the 751R V2 trigger outputs for this. Connect a

suitably long 3.5mm mono jack 3.5mm mono jack lead from the Trigger A or

Trigger B output as shown.

Zone 2

To set the Trigger output to follow Zone 2 select Advanced Setup in the OSD

then Trigger A (or B).

Now select Follow Standby and select Zone 2. The trigger output will now be

active (high) when Zone 2 is On and inactive (low) when Zone 2 is Off.

Note: The Trigger menu also allows for Manual Select (i.e. the trigger toggles

each time the Trigger A (or B) button is pressed on the main remote handset.

If you want to disable this function and have the trigger only follow the Zone

2 on/off status ensure that Manual Select is set to No. See the Trigger menu

section for full details.

Controlling Zone 2 from the main room

Controlling Zone 2 Components

From the main room you can use the main remote handset or the buttons on

the front of the unit itself and operation is the same in either case.

First press the Zone 2 button on the front panel or remote then another

button for a function you wish to affect Zone 2 within 5 seconds.

If a command is not received within 5 seconds the unit will return to normal

operation.

To turn on Zone 2 press the Zone 2 button followed by the Standby/On

button within 5 seconds.

When Zone 2 is pressed the display will initially show Zone 2 : Off once

Standby/Off is pressed the display will change to show Zone 2 : BD/DVD or

whatever was the last source used in Zone 2.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Cambridge 751RV2 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Cambridge 751RV2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info