Bedienungsanleitung Camina-Schmid Profi W (Seite 9 von 16) (Englisch)

810681

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

5. Commissioning

Handover to operator

5.1 Before commissioning:

The installer must compile detailed operating and

servicing instructions for the entire system. The Profi W

heating insert must be commissioned by the installer. This

is generally the tile stove installer and central heating

installer jointly.

5.2 Commissioning:

The installation, adjustment and functioning of all system

components, in particular the control and safety organs,

must be subjected to renewed inspected. The operator(s)

must be given detailed instructions on the system's

functioning, operation and servicing, e.g. boiler stove and

safety devices and regulations in particular.

Allow the operator to actively participate in the commis-

sioning process, describe procedures carefully and in

detail, have the operator repeat important details until

completely at familiarised with the system.

5.3 Handover to operator

When complete, hand over:

Operating and servicing instructions for the entire

system (Point 5.1).

Schmid Profi W heating insert installation and operating

instructions.

Additional documentation, e.g. control system,

circulation pump, thermal discharge safety device, etc.

5.4 Handover log:

Compile a handover log and separately list all documents

handed over in it.

6.1 Preface:

The operating instructions must be readily available to the

system operator and the system operator must be aware of

the contents of the operating instructions (product safety

act!).

6.2 Pre-commissioning inspections:

The flow pressure in the thermal discharge safety

device/safety heat exchanger's cold water inlet must be at

least 2 bar betragen. Correct functioning must be checked

on commissioning and at least once annually!

The safety heat exchanger outlet pipe must be able to

drain freely.

The heating circuit must be completely filled with water

and be vented.

A voltage must be present at the circulation pump

thermostat.

7.1 Servicing:

In case of falling heating capacity, draught problems,

smoke egress, etc., but always at the end of the heating

season, thoroughly clean the heating insert, fire tube, fuel

gas passes, etc. It is recommended that this work be

carried out by the stove system installer or other suitable

specialist. This is because fire tubes may need to be

removed, sealed connections broken or cleaning covers

refitted to ceramic fuel gas passes.

Recommendation:

Have the operator sign the log to confirm that they

have received all the documents listed and that they

are completely familiar with the system.

6. Operating instructions

7. Servicing and shut-downs

Warning:

The tile stove may only be heated if the above

conditions are met.

www.schmid.st

Regular inspections and servicing of heat generation

systems guarantees safe, fault-free and environ-

mentally friendly operation.

We therefore urgently recommend carrying out

servicing at least once annually.

For example, leaks around fire tubes, connectors, etc.,

lead to increased soot deposits, heating-up and draught

problems, escaping fumes or condensation, especially

during the transition periods. The boiler stove should also

be thoroughly cleaned.

7.2 Shut-downs:

In order to prevent corrosion the boiler stove should be

cleaned before extended shut-down periods (Point 5.2).

Do not drain the heating circuit water (corrosion, scale

formation)!

7.3 Pre-heating season:

Thermal discharge safety device functional inspection by a

specialist at least once annually and repair if necessary.

Vent heating system and boiler stove, top up water if

necessary, inspect for leaks. Inspect outlets (e.g. for

thermal discharge safety device) for free drainage

Combustion air:

Outside air connection variable

for either right or left side

Fuel gas channel:

Several options are available

from the top, right or left

Fitting tube door

? with choice of fill

? with stone or glass plate

Point 7.1 Fig. 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Camina-Schmid Profi W Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Camina-Schmid Profi W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info