Bedienungsanleitung Canon Legria HF G26 (Seite 129 von 146) (Englisch)

708912

129

Zoom out

Zoom in

Vorherige Seite

1/146

Nächste Seite

Troubleshooting

129

Recording was stopped due to insufficient write speed of the memory card

- The write speed of the memory card was too slow so recording was stopped. Replace the

memory card with one rated SD Speed Class 4, 6 or 10.

- When the recording mode is 28 Mbps LPCM, 28 Mbps or 35 Mbps, you must use a memory

card rated SD Speed Class 6 or 10.

- When recoding movies using slow & fast motion, you must use a memory card rated SD Speed

Class 10.

- After repeatedly recording, deleting and editing scenes (fragmented memory), it will take longer

to write data on the memory card and recording may stop. Save your recordings (A 101) and

initialize the memory card (A 29).

Scene recorded using another device. Cannot copy the scene.

Scene recorded using another device. Cannot divide the scene.

- Scenes that were not recorded with this camcorder cannot be copied or divided with this

camcorder.

Some scenes could not be deleted

- Movies that were protected/edited with other devices and then transferred to a memory card

connected to the computer cannot be deleted with this camcorder.

Some scenes were recorded using another device and cannot be copied.

- Scenes that were not recorded with this camcorder cannot be copied.

Task in progress. Do not disconnect the power source.

- The camcorder is updating the memory card. Wait until the operation ends and do not

disconnect the compact power adapter or remove the battery pack.

This photo cannot be displayed

- You may not be able to display photos taken with other devices or image files created or edited

on a computer and then transferred to a memory card connected to the computer.

To record video on this memory card, it is recommended to use a video quality setting other

than [50.00P Recording].

- When using a memory card rated SD Speed Class 2 or 4, you may not be able to record

movies if you use a recording mode of 28 Mbps LPCM (50.00P), 28 Mbps (50.00P) or 35 Mbps

(50.00P).

To use this function change the camera mode to Manual or Cinema

- The CUSTOM button, the CUSTOM dial (A 83) and some of the functions that can be

assigned to the assignable buttons (A 84) cannot be used in mode. Set the mode

switch to n ( mode) or E( mode) to use them.

Too many photos. Disconnect the USB cable.

- Disconnect the USB cable. Try using a memory card reader or decrease the number of photos

on the memory card to fewer than 2,500 (Windows), or 1,000 (macOS).

- If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and

restore the connection after a short while.

Unable to recognize the data

- The camcorder cannot recognize data that was recorded using a video configuration that is not

supported (NTSC).

Unable to recover data

- Could not recover a corrupted file. Save your recordings (A 101) and initialize the memory

card using the [Complete Initialization] option (A 29).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Legria HF G26 Seite 129

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info