Bedienungsanleitung Canon Legria HF G26 (Seite 127 von 146) (Englisch)

708912

127

Zoom out

Zoom in

Vorherige Seite

1/146

Nächste Seite

Troubleshooting

127

Cannot play back Check the memory card

- There is a problem with the memory card. Save your recordings (A 101) and initialize the

memory card using the [Complete Initialization] option (A 29). If the problem persists, use a

different memory card.

Cannot play back Initialize only using the camcorder

- The memory card in the camcorder was initialized using a computer. Initialize the memory card

with this camcorder (A 29).

Cannot play back

- Movies cannot be played back from a 64 MB or smaller memory card. Use a recommended

memory card (A 28).

Cannot record Check the memory card

- There is a problem with the memory card. Save your recordings (A 101) and initialize the

memory card using the [Complete Initialization] option (A 29). If the problem persists, use a

different memory card.

Cannot record movies on this memory card

- Movies cannot be recorded on a 64 MB or smaller memory card. Use a recommended memory

card (A 28).

Cannot record

- There is a problem with the memory card. If this message appears often without apparent

reason, contact a Canon Service Center.

Cannot trim the scene

- MP4 movies that were copied to a memory card with a larger cluster size than the memory card

they were recorded on cannot be trimmed.

- MP4 movies that were recorded or copied using other devices cannot be trimmed.

Charge the battery pack

- Battery pack is exhausted. Charge the battery pack.

Check the memory card

- Cannot access the memory card. Check the memory card and make sure it is inserted

correctly.

- A memory card error occurred. The camcorder cannot record or display the image. Try

removing and reinserting the memory card, or use a different memory card.

- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card

(A 28).

- If after the message disappears, 6/7 appears in red, perform the following: Turn off the

camcorder and remove and reinsert the memory card. If 6/7 turns back to green you can

resume recording/playback. If the problem persists, save your recordings (A 101) and

initialize the memory card (A 29).

Do not disconnect the power source. Do not disconnect the USB cable unless you first use

the computer to safely end the connection.

- When the camcorder is in mode and is connected to the computer with a USB cable, the

camcorder cannot be operated. Disconnecting the USB cable or power source while this

message appears may result in permanent loss of the recordings on the memory card. Use the

computer's Safely Remove Hardware function to end the connection and disconnect the USB

cable before using the camcorder.

File name error

- The folder and file numbers have reached their maximum value. Set [FUNC.] > [MENU] >

> [File Numbering] to [Reset] and delete all the MP4 movies (A 91) and photos

(A 100) on the memory card or initialize it (A 29).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Canon Legria HF G26 Seite 127

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info